Philips Hue Dimmer Modules - Corner and Wall inserts

Want to discreetly mount your Philips Hue sensor in a wall, drywall, plasterboard or wood panel? No problem. My handy little adapter will fit the sensor snuggly and hide the edges of your cut-out or the new version which is also suited for corner mounting. 

Featuring:

• A hole at the rear to mount a 8x3mm magnet (Although it's not required as the sensor fits snug).
• A smaller hole at the rear of the brack to push the sensor out with a thin tool.
• Perfect flush, snug fit of the sensor in the holder.

Four Options:

Build Plate 1 - Wall/Drywall housing insert, to insert your hue sensor flush to a wall. The cutout should be about 62x62mm and 28mm deep.
Build Plate 2 - Wall cutout cover only.
Build Plate 3 - Corner module with flat top
Build Plate 4 - Corner module with a angled top (can be mounted upside down to have the angle at the bottom. 

Sample is printed on the Bambu X1C using white PLA on a smooth PEI board for a perfect finish. Should do well on the texture plate too. For a commercial licence please contact me. Small one-time fee and sell as much as you like.

Please see pictures for examples.