Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Orange
At layer #16 (1.36mm) swap to Sakura Pink
At layer #20 (1.68mm) swap to Ivory White for the rest.

P.S. Don't resize Z,

Enjoy ;)