My own design of a bolt sorting plate. Similar to the preloaded one in the P1 and X1 printers but with extra features.

Can measure bolt diameters up to m12, bolt length up to 100mm and 4 different thread pitches. Also includes 6 holes in the back for 5x3mm magnets to be glued in if you wanted to stick it to your fridge or toolbox.

I only included 4 thread pitches because anything under m8 only has one pitch, and there's only 4 possibilities for thread pitches between m8-m12.

Default print settings on my P1S made it plenty strong and plenty readable.

Could probably fiddle with wall thickness and infill % to get the print time down and/or strength up, but it's not necessary.

I don't know how the 1.0 threads would go with a layer height above 0.2mm, but you can obviously try.