Legend of Zelda - Archer Link - 6 Colour Hueforge
My other Nintendo Themed hueforges can be found here:
https://makerworld.com/@CanadianGamer/collections/835925
I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
Please post a picture of your printed copy! I'd love to see it!
The pictured Frame is a friction Fit design here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475
And if you scale it down, I have frames for 100x100 or 150x150 here:
https://makerworld.com/en/models/173529#profileId-190705
— Printing Instructions---
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Dark Brown Transmission Distance: 2.1
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA Bambu Basic Gold Transmission Distance: 5
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Dark Brown
At layer #19 (1.6mm) swap to Latte Brown
At layer #20 (1.68mm) swap to Gold
At layer #22 (1.84mm) swap to Latte Brown
At layer #25 (2.08mm) swap to Jade White for the rest.