Size is 140x200mm. If scaling down do use only the X and Y axis. Make sure to keep Z the same.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Beige
At layer #8 (0.72mm) swap to Ivory White for the rest.