Hazbin Hotel Alastor Staff Wand Microphone and Stand CULTS CU. TV series, cartoon, props, cosplay

Attention! Must Read Before Buying!

LICENSE: CULTS CU

You are authorized to:
· Print — sell and distribute 3D prints of the 3D model and its adapted models for any use, including commercial use, in unlimited quantities;
· Adapt — remix, transform and create from the digital files of the 3D model.

What is not allowed:
· No sharing of your 3D prints, nor adaptation of the 3D model without attribution;
· No distribution, sale, donation or exchange of the digital files of the 3D model and the digital files of 3D models adapted from it.

Alastor's microphone, Hazbin Hotel. 155 x 112 x 247 mm dimensions of the largest part. Large parts are divided into several parts for easy printing on small printers with a print volume of less than 200 x 200 x 200 mm. The parts are mounted on a metal pipe, wooden rod or other, with an outer diameter of 20 mm. To install parts on a pipe without glue, there are options for 3D models of parts with holes for screws and nuts.

To install the parts using screws, you will need:
M5 x 25 screw - 2 pieces;
M3 x 30 screw - 2 pieces;
M5 washer - 2 pieces;
M3 washer - 2 pieces;
M5 nut - 2 pieces;
M3 nut - 2 pieces.

We sell only high-quality and highly detailed 3D models adapted for 3D printing. Buying 3D models from us, you get a correct and canonical product.

Other license options:
CULTS PU https://cults3d.com/ru/3d-model/fashion/hazbin-hotel-alastor-the-radio-demon-3d-model-set-tv-series-props-cosplay
CC BY-NC https://cults3d.com/en/3d-model/fashion/hazbin-hotel-alastor-staff-wand-microphone-and-stand-cc-by-nc-tv-series-cartoo