Bambu reusable spool compatible with filament clip Remixed by jf.marinaoka

Remixed by

jf.marinaoka

3D Printer>3D Printer Accessories

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

PLA .4mm nozzle 0.28mm layer, 2 walls, 10% infill

Designer

3.4 h

2 plates

4.9(8)

PLA 0.6mm nozzle, 0.3mm layer, 2 walls, 10% infill

Designer

3.5 h

2 plates

5.0(2)

ABS .4mm nozzle 0.28mm layer, 2 walls, 10% infill

Designer

3.4 h

2 plates

5.0(1)

ABS, 0.6mm nozzle, 0.3mm layer, 2 walls, 10% infill

Designer

3.4 h

2 plates

Click to see more

Boost

138

151

Released

Description

update 3

If you want to use cardboard spool you will need a adapter

you rip the cardboard on side at the time and insert the spool adapter plus the reusable spool, then you flip the rool and do the samething the other side. you can now use your Bambu RIFD for other brand of filament spool adapter link here

update 2

just add a .4mm nozzle ABS profile that you can use with the ABS filament clip profile

update 1

I just did a .4mm profile for PLA and with this one you can use the filament clip you want… no need to look at my profile….you can print the 2 colour one but thay fit a little bit tight, I had to use plier to press them in

Ok so I needed a spool that is fast to print, dosen't take mutch filament, that is direct replacement of the real bambu spool with RFID support, able to receive bambu filament identification sticker and something that use the bambu filament clip

because I'm using a .6mm nozzle I rescaled the hole on the spool to insert the filament clip and also, I will drop a .6mm nozzle print profile for the filament clip so every part fit together!!

this is aslo a smooth plate profile, you can stick the bambu sticker on the side of your spool for filament identification.

why I need the filament clip? because in my drybox the filament spool fit verry tight so I don't want filament sticking out the side and those clip fit in the AMS.

It is really the ULtimate spool acording to me and my setup

Comment & Rating (24)

@user_1738000517

Print Profile

PLA .4mm nozzle 0.28mm layer, 2 walls, 10% infill

Друкується легко, розміри без люфтів, не вистачає шкали залишку філаменту в метрах, або %

(Edited)

The designer has replied

@jf.marinaoka

thanks

@D2Designs

Print Profile

PLA 0.6mm nozzle, 0.3mm layer, 2 walls, 10% infill

nice design. printed smoothly

The designer has replied

@jf.marinaoka

thanks

@user_2496037713

I am going to give this one a try! I am on a quest for fast amd easy solution. I printed the rim adapters but they break on me constantly so not a real solution. Trying to avoid having to do the pastamatic. Hopefully this works!

The designer has replied

@jf.marinaoka

if like me you are using cardboard Amazon filament these reusable spool work really god but you will need to print a spool adapter for that!!! I can show you one that work for me if you want no need to respool, just rip the side off on side at a time and insert the adapter