Reusable zip tie
Reusable zip tie
Boost
50
88
14
Print Profile(2)
0.16mm layer, 5 walls, 15% infill
Designer
12 min
1 plate
0.16mm layer, 5 walls, 15% infill
15 min
1 plate
Boost
50
88
14
0
156
117
Released
Description
Easy to print reusable zip tie, that is printed on bambulab under 8 minutes.
Comment & Rating (14)
All
Print Profile
0.16mm layer, 5 walls, 15% infill
Decent. Holes are a bit large. Too much play.
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
love that design. very handy and useful
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
Printed with PETG
Works fine
(Edited)
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
Model is nice, but PLA is not good idea 😅✌🏻
0
Reply
What filament?
The designer has replied
0
Reply
Makes only sense with TPU.
0
Reply
PLA is good :)
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
Printed perfectly, although I chose PLA-Tough and it breaks with repeated bending. That's my fault, though. Will definitely try in TPU at some point!
0
Reply
These are perfect for road trips when I need to bundle up my cords. Will definitely print a few of these!
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
![[Remix] reusable zip tie](https://makerworld.bblmw.com/makerworld/model/USb34abf7041cab6/design/2024-04-01_7d59b26eaa663.jpg?image_process=resize,w_400/format,webp)
Related Models
© 2024 MakerWorld