CHEVROLET CAMARO - DRIVE SHAFT AND DIFFERENTIAL

Differential and accessories for Chevrolet Camaro, the kit includes differential, half-shafts, sleeves and various shafts, there are also various accessories to customize and adapt the transmission to your custom build, it is possible to vary the length of the transmission pole which is modular.
A bonus pack is included that includes driveshafts with different lengths.
The axle shafts and the transmission pole are articulated with a real articulated cross.
The inside of the differential is skeletonized to facilitate printing and increase realism, the level of detail is very high.
The engine and gearbox are not included, they are available separately.

CHEVROLET CAMARO ZL1 - LT4 ENGINE https://cults3d.com/en/3d-model/various/chevrolet-camaro-zl1-lt4-engine

GM 8L90E - GEARBOX https://cults3d.com/en/3d-model/various/gm-8l90e-gearbox

Disclaimer:
- The resale of my files is NOT allowed
- Printing for commercial use is NOT allowed
For authorizations and concessions please contact me here on Cults.

The photos represent the engine made with a resin printer, some photos are renderings of the project I made.
It is possible to print with FDM printer at moderate speed but obviously the level of detail will be lower and in some cases the supports will be necessary.
These are my printing parameters using Elegoo printers and YAJO standard resin.

PRINTER............BASE EXPO....NORMAL EXPO....RES

JUPITER............37sec.............2,0sec.................0,050mm

MARS 2 PRO.......45sec.............4,5sec.................0,050mm

SATURN.............35sec.............3,5sec.................0,050mm

Change scale:

1/10 > 1/25 -40,00 %

1/10 > 1/24 -41,66 %

1/10 > 1/18 -55,55 %

1/10 > 1/12 -83,33 %

1/10 > 1/8 -125 %