Formula1

F1

*created with filament painting technique using hueforge software.

Remember if you want to scale, do it only with x and y axis, z must be the same as original.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: you can try to use for e.x. Normal black, gray, normal white and latte brown
PLA BambuLab Matte Charcoal
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Beige
PLA BambuLab Basic Jade White

Swap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually
Start with Charcoal
At layer #6 (0.56mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Beige
At layer #22 (1.84mm) swap to Jade White for the rest.