Millennium falcon 2 creado para imprimir con la aplicacion hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Negro Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA PLA Bambu Cian Transmission Distance: 5

Swap Instructions:
Start with Negro
At layer #10 (0.88mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Jade White
At layer #24 (2mm) swap to Cian for the rest.