5 colour verison of penny wise the clown, 6 color avaliable in the print profiles soon (see images)
133x200 but can be scaled as needed (printed image is at 80% on X and Y)
enjoy :)
5 color instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #14 (1.2mm) swap to Marine Blue
At layer #15 (1.28mm) swap to Orange
At layer #16 (1.36mm) swap to Dark Red
At layer #19 (1.6mm) swap to Orange
At layer #23 (1.92mm) swap to Ivory White for the rest.
6 color instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #14 (1.2mm) swap to Marine Blue
At layer #15 (1.28mm) swap to Orange
At layer #16 (1.36mm) swap to Dark Red
At layer #19 (1.6mm) swap to Orange
At layer #23 (1.92mm) swap to Lemon Yellow
At layer #26 (2.16mm) swap to Ivory White for the rest.