A simple stackable storage system with Shutter doors style, simple and easy print.

This is part of My ongoing Stackable Series, you can find links below and stack them as you want.

-Shutter Door box: https://makerworld.com/en/models/218307#profileId-254321
-Wooden Doors Box: https://makerworld.com/en/models/460414#profileId-368873
-Tilt Doors Box:  https://makerworld.com/en/models/463242#profileId-371738

-Drawer Box: coming next.
-More ideas will be coming in the future.

Just a simple print and assemble with no need to use screws.

Print the connecter STL file to connect other boxes from the stackable series.

Printing:
Support: Not needed, but you can if your supports clean smoothly with no leftovers.
Print Orientation: Lay flat on the closed back end of the box.

Assembly:
Slide in the shutter door from the bottom end of the rail, and it will need a small push from where the rail curve than when its in it will be smooth to slide up and down.