Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Red Transmission Distance: 5
PLA Yellow Transmission Distance: 6
PLA White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #4 (0.64mm) swap to Red
At layer #11 (1.76mm) swap to Yellow
At layer #16 (2.56mm) swap to White for the rest.
Frame for the picture:
https://makerworld.com/en/models/209367#profileId-229295