Feet riser for SSUPD Meshlicious.
25mm height. There are 4 different versions:
- 3mm screw holes with 25mm height.
- 3mm screw holes with 24mm height and a 2mm hole in the base to use original 3mm rubber pads, making a total height of 25mm.
- 4mm screw holes with 25mm height.
- 4mm screw holes with 24mm height and a 2mm hole in the base to use original 3mm rubber pads, making a total height of 25mm.
With 3mm versions you can use old notebook screws if you have.
In order to use, original rubber pads should be removed.
Printed with a Sermoon v1 pro with .20mm layer and 20% infill using PLA.