Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Generic Black Transmission Distance: 1
PLA BambuLab Basic Red Transmission Distance: 0
PLA BambuLab Basic Yellow Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.