Espresso Knock box by user_2869450039

user_2869450039

Household>Other House Models

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

1 plate, single color, 0.16mm layer, 2 walls, 15% infill

8.1 h

1 plate

5.0(1)

Boost

Released

Description

This is an espresso knockbox that prints in two parts.

Both the main box and drawer are printed from PETG.

I used a 21.2 mm OD PVC pipe for the bar of the knockbox because I wanted it to be a bit more durable.

Comment & Rating (5)

@meCoreyG

Print Profile

1 plate, single color, 0.16mm layer, 2 walls, 15% infill

Love it! beautiful design, easy print… support came right out. I wish I would have scaled it a little bigger. scaled is 125% and should have did 150% like I planned. black is PETG from Creality red is PLA Matte from Bambu

@SJWORKS

It's easy to print the design in ABS, but sometimes all of the puck doesn't always fall into the basket. Increasing the size of the design could help.

@meCoreyG

Anyway to get a printable knock rod?

The designer has replied

@user_2869450039

Updated! An STL of the bar is now available for download. Please note that it could be printed vertically or horizontally with supports. Printing it horizontally will be much stronger, but it may not come out perfectly circular and not properly snap into place in the box. If you do end up printing it in the horizontal orientation, please let me know how well it fits into the box.

@meCoreyG

Thank you I am printing now and will let you know how it goes

No more