Rocky Balboa Lightbox LED Lamp by SilMan3D

SilMan3D

3D Printer>Test Models

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

3.8 h

2 plates

5.0(3)

Boost

Released

Description

Rocky Balboa 2 colors

Tips

I recommend using a textured PEI sheet and the print profile I provided since it has settings with which I've been able to get the best results, if you do not want to use it these are the general bambu studio settings:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color

Comment & Rating (8)

@FrankJ.Gesco

Print Profile

0.2mm layer, 2 walls, 15% infill

I printed the whole project, used black for the bodysuit and gold for the lettering. TOOOP

The designer has replied

@SilMan3D

I'm happy to hear that everything turned out well! 🤩 Thanks for the amazing make and feedback! 🙏 Happy printing and if you have a moment of time you can check out my other BambuLab designs! 😃

@FrankJ.Gesco

Replying to @SilMan3D :

Certo, ho messo il follow...da quello che crei ho presupposto che tu sia italiano ;)

@SilMan3D

Replying to @FrankJ.Gesco :

Vero, italianissimo! 😃 Grazie mille 🙏

@user_481890907

do I need a special fillament for it which is more transparent? And what led do you put in it? looks great!

The designer has replied

@SilMan3D

To make it more transparent you would have to decrease the levels of the red color but with the filament I use it comes out perfect like this, very bright. https://it.aliexpress.com/item/1005006436319696.html with Switch, White Light, 1m IP21