This model is a great test for ironing and just general printing after tuning in your filament. I use 1in by 1in off cuts of address labels to label each swatch but vinyl would work also I find that 1 in is a good balance of space to write on and not being too wasteful. With an AMS you can print 4 of these at a time on all the “regular” sized Bambu Printers (256mm^2) with very little waste using print by object.

My printing standard for my swatches is:

• 5 top layers for non ironing samples, only 3 when ironing
• 3 Bottom Layers
• 2 Walls
• 15% Grid Infill
• 0.6mm Nozzle
• 0.36 Layer Hight
• 25mm/s for Ironing

The gridfinity storage box can be found here: https://makerworld.com/en/models/195096

As I test more filaments results will be posted in spreadsheet form in documentation or google drive. But they are here in downloadable form:

https://makerworld.com/en/u/1158459768/collections/653293