Bambu Labs X1 Carbon - P1S Side Mount Spool Holder light Remixed by ineiub

Remixed by

ineiub

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 4 walls, 30% infill

Designer

3.3 h

1 plate

4.8(30)

screw and roller holder scaling fix , 15~25% infill.

3.4 h

1 plate

4.8(17)

Boost

109

264

548

443

Released

Description

This is a remix of ryan.fransen beautiful design of a side spool holder. I make it lighter and faster to print with less material usage.

I also add a roller version to make it smoother.

The bearings are a 8x22x7

You also need 4 new m3 x 20mm screws

UPDATE

Thanks to user suggestions I updated the main body with a longer and thicker arm to reach the center of the spool.

Here a remix of the original AMS Lite Spool holder made by 3Dbacon to fit this version.

https://makerworld.com/en/models/234955#profileId-251291

FUTURE UPDATE

Left hand threads for spindle holders to maintain compatibility with the original project

Comment & Rating (63)

@danimar.gabriel

awesome design fits perfect you should add on the description that you need 4 new m3 x 20mm screws cuz the original ones are short. Printed in ABS

The designer has replied

@user_610966074

Thank you for the suggestion

@fmod

Boosted

i used 4 m3 x 12 mm screws which already stick out a tiny bit more than the original ones (m3 x 4mm). idk, was worried these extra 8 mm might poke into something important. anyways. m3 x 12 mm works perfect (also)

@RylieTheCollie

Print Profile

0.2mm layer, 4 walls, 30% infill

works great and spins smoothly, mines bending down a little so I might replace it with PETG later on but so fair it’s great. printed in Bambu lab: Pla matte ice blue

@zhakryuu

You can screw the holder one more circle, it will be nice and tight.

@user_3703462721

perfect fit and printed very easily. thanks

@DoubleT

Print Profile

0.2mm layer, 4 walls, 30% infill

works as advertised

@LanceVance

Print Profile

screw and roller holder scaling fix , 15~25% infill.

Thanks for beautiful design and model! I printed everything with PLA and most of it fits like a charm, except for the thread. At two corners there are vertical dots of wall filament missing and the screw so tight, that I can't get it in without breaking.

@zhakryuu

Print Profile

0.2mm layer, 4 walls, 30% infill

Great model but the profile seems to have a weakness near the spool holder, the settings I felt could give up at some point so I added a modifier in the area which made it super strudy. Also I do not know about the fitting orientation, when you push the filament it sometimes moves the ptfe, instead I turned it on the other side, now ti works great!