Nextion basic 2.4" touch screen for Racilio Silvia machines. Touch screen is meant for gaggiuino mods but can be used for other silvia pid modifications. Case has slot to insert microSD cards to easily upgrade firmward of screen.

Requires removal of Rancilio name plate and drilling 1/2in or 13mm hole into the sheet metal chassis.

Multiple mounting options:

• 2x M3 counter sunk screws and nuts,
• 2x 6x3mm magnets, or
• 2x 8x3mm magnets

If using magnets, I would recommend still using M3 counter sunk screws to act as alignment pins. Insert magnets from top side of backing plate (side opposite of build plate). Magnet holes are dafted and should hold magnets without CA glue if printer/filament is tuned well.