USE AT YOUR OWN RISK:

PLEASE BE AWARE THAT MOUNTING ITEMS TO THE DISPLAY CAN BE RISKY AND DAMAGE IS POSSIBLE.

1) This adds weight to the display.

2) This is large in comparison to the display and could easily see forces from accidentally being hit.

3) Unintentional pressure while installing or removing.

I AM JUST BEING CAUTIOUS and have not seen any issues caused by this model.

That being said, I have tried to reduce all risks by designing this model to be a loose fit and only as large as needed to hold the parts.

This model gives quick and easy access to your nozzles. With A1's quick nozzle change design, I have found that I change my nozzles more frequently than with other printers. As such, I wanted them more accessible and more visible to remind myself that I have options.

I have provided 4 designs, all provided as separate plates in the 3mf file.

3 Nozzle Caddy

3 Nozzle Caddy WITH TOOL HOLDER

5 Nozzle Caddy

Display Trim

If you would like other layouts, please let me know.

ASSEMBLY:

1. Rotate the A1 display about half way toward its shipping position.
2. Slide the “Pocket” side of the caddy over the bed side of the display.
3. Gently pull the model to the right until the model can be pressed over the edge of the display.
4. Rotate the A1 display to its normal operating position.