The model is based on Sapkowski's The Witcher. It is best to print it in four colors: black, gray, light gray and white.

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm

Filaments Used:
    PLA Black Transmission Distance: 0.3
    PLA Gray Transmission Distance: 2.5
    PLA Light Gray Transmission Distance: 3
    PLA White Transmission Distance: 6

Swap Instructions:
    Start with Black
    At layer #6 (0.96mm) swap to Gray
    At layer #13 (2.08mm) swap to Light Gray
    At layer #17 (2.72mm) swap to White for the rest.

Frame: https://makerworld.com/en/models/209367#profileId-229295

Original size: 200 mm x 200 mm.