NEW Head Dust Cover V2 for P and X series by AstraCD

AstraCD

3D Printer>3D Printer Accessories

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

PLA - With LOGO - 0.2mm layer, 2 walls, 30% infill

Designer

20 min

1 plate

4.7(36)

PLA - No Logo - 0.2mm layer, 2 walls, 30% infill

Designer

10 min

1 plate

4.8(36)

PETG - No Logo - 0.2mm layer, 2 walls, 30% infill

Designer

13 min

1 plate

4.9(15)

PETG - With LOGO - 0.2mm layer, 2 walls, 30% infill

Designer

24 min

1 plate

5.0(6)

Click to see more

Boost

191

411

118

695

523

Released

Description

NEW Head Dust Cover V2 for P and X series

With so much positive response on V1 you guys deserve even better improved version. I made V1 just as cover for myself and didn’t really design it with intention that it will become so popular, so I decided to make better improved version that I should off done from beginning.

I made two version with logo and without logo, you can download as per your liking. Thank you for downloading, and I hope this model will serve you even better.

As I mentioned in my previous model this part cannot be too tight as it pops off front cover on sudden fast head changes or stops. I made over 50 different variants and test it to make sure to get to this point.

Thank you for your support!

Comment & Rating (118)

@hktsenga

Print Profile

PLA - With LOGO - 0.2mm layer, 2 walls, 30% infill

First time I printed have some trouble in ABS I tried using high bed temperature,and second result is good. thanks you sharing your nice design.

The designer has replied

@AstraCD

unfortunately bed temperature depends on what kind of filament you are using. thank you for sharing pictures.

@hktsenga

I used ABS

@Weslovold

Print Profile

PETG - No Logo - 0.2mm layer, 2 walls, 30% infill

I ended up printing mine in transparent PC on the textured PEI plate and it turned out pretty cool. You’d probably end up with the same effect with transparent PET-G.

(Edited)