Pirate Island round bases set x276
$8.00 Pirate Island round bases set x276
3D
Published 2023-12-15T09:33:30+00:00
These are the rewards of our Base Boost Kickstarter campaign. The Late Pledge is available here.
The Pirate Island round bases set consists of 69 unique bases with different diameters with 4 bottom variations each - full/cup/magnet/topper (276 bases in total):
- 20mm - 10 pieces
- 25mm - 10 pieces
- 28.5mm - 10 pieces
- 32mm - 10 pieces
- 40mm - 5 pieces
- 50mm - 5 pieces
- 60mm - 3 pieces
- 65mm - 3 pieces
- 75mm - 3 pieces
- 80mm - 3 pieces
- 90mm - 3 pieces
- 100mm - 1 piece
- 125mm - 1 piece
- 130mm - 1 piece
- 160mm - 1 piece
Special conditions for large bases:
- Stiffeners
- Splitted into parts so that it fits on the M1 table (in the form of a puzzle, so that in the middle you can make a slot for a magnet for the version with magnets)
*For topper and full bottom versions there is only 1 version of files included: unsupported. You can print them from the table without supports.
Recommended parameters for printing bases without supports on a photopolymer printer:
- 10 layers of bottom
- 3 seconds illumination time
- 30 seconds time of illumination of the bottom
The printing parameters of such bases on the FDM printer depend on the printer model.
*For magnet and cup versions there is 2 versions of files: supported and unsupported.
Scaled for 28 mm tabletop.
There is a 30% discount on STL files and 15% on physical copies for all Patrons and Tribers!
patreon.com/TaigaMiniatures
myminifactory.com/users/Taiga_Miniatures?show=tribe
All parts have been prepared and tested for 3D printing. We recommend to print in resin.
These models are designed by dakkadakka.store. Miniatures for tabletop games and collecting.
All rights reserved. Commercial use is provided ONLY if there is a commercial license. For more details visit our Tribe.
Be sure to follow us on Instagram @taiga_miniatures to not miss any updates!
for units:
layer height - 0.03mm
exposure time - 3 sec
For vehicles and terrain:
layer height - 0.05mm
exposure time - 4 sec
| Date published | 15/12/2023 |
| Price | $8.00 |