Asian Hornet trap (10 different models) + bait box

THREE DIFFERENT TYPES OF SELECTIVE TRAPS :

1- CONES + OUTLET PLATE:

Here's the entrance to an Asian hornet trap.

Design in "Mini" mode: 9cm x 9cm

Can be screwed, hot-glued or taped

Following some advice, I added an 8mm inlet reducer (optional)

The bait box can be hung up (enter a rope through the hole in the lid and tie a big knot underneath)

Holes :

• Large hornet trap inlet: 29mm x 10mm

• Round hornet entrances: 8.5mm diameter

• Insect outlet: 6.5mm diameter

• Round trap outlet: 5.5mm x 9mm and 5.5mm x 16mm

2- FA TRAP FOR PET PELLET :

Selective trap for Asian hornets

Entrance: 8.5mm: traps smaller hornets and insects but does not allow entry to European hornets and butterflies

Exits: 6.5 mm round openings allow small insects to exit, but not Asian hornets

Can be fitted to a PET bottle (Coke, etc.). Bottle can be dropped or hung.

CAUTION: DO NOT FILL THE BOTTLE WITH LIQUID, AS THIS MAY KILL THE NECESSARY INSECTS.

EITHER place solid or absorbent materials (wood shavings, sand, stones, etc.) in the bottom of the bottle.

OR Print the tube and cap for the bait. You can also hang the bait from a string by wedging it into the cap.

3- UNIVERSAL FA TRAP

Selective trap!!! the entrance hole prevents large insects from entering, while the design allows bees to leave the trap without worry.

Simply fit the trap to any glass jar with a maximum opening of 8.5mm (not suitable for European hornets), according to the file.

4- FA PIEGE POUR BOCAL Twist Off (jam, honey, ...)

Sizes TO 63 - TO 70 - TO 77 - TO 82

Normal model and "Light" model using less plastic

Selective trap !!! the entrance hole prevents large insects from entering, while the design allows bees to leave the trap without worry.

Can be placed on its side (with a small stop to prevent it from rolling), upright or suspended. A small roof can be added to prevent rain from filling the jar.

5- QUEEN EXCLUDER + CONE

small 8.5mm FA inlet cone and 160 x 160 mm queen excluder (complete model or model with space for cone)

6- BAIT BOX

To put in the trap or with the connector to put outside (and change it without putting your hand in).

I'm leaving this file free of charge to help the beekeepers who fight these bugs on a daily basis!

After printing, make a "MAKE" and post your photos with your catches!