Super Mario 3D World Super Bell Hill -Complete Model Remake

Excuse the tac holding the props in, as I wanted to get this up before any paint hits the model, also I have a lot of smoothing to do.

I was originally going to enhance the game model from www.models-resource.com and put this up for free, but I was having way too many issues with the 'basic' game model that it wasn't really doable.

So, instead I fully remade the model and all of it's props in Rhino and enhanced them in ZBrush!

First I printed the small version, which is the ideal size for a miniature, with the base standing at 76mm high with a width of 99mm.
I loved the look of it so much that I really wanted to go bigger, so I split the model in half to create the large version.
This new version (once put together) stands at 143mm high with a width of 185mm. The only issue I had was cutting into the model for two pins from the bottom to fit into the top part, which you'll have to manually grind out (see the product images).

Anywho, the larger version shows a lot more detail, like an enhanced texture for the 'islands' of the model. Everything's just BIGGER. So it's all down to personal preference.

I've printed these two on the Elegoo Saturn 2.

Included are files for both standard and large versions of the model, and hollowed/supported files too, for the orientations that I've printed.

If you're choosing to print the pipe model in clear resin, then I wouldn't recommend using the hollowed/supported file, I would instead use the standard file and print it solid and supported (at least this is what I will do).