Skip to content

Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet

signal-2023-10-16-164348_003.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-16-164348_004.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-17-183743_002.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-17-183743_004.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-17-183743_003.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
Fullscreen-capture-2032024-74004-PM.jpg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
Fullscreen-capture-2032024-73740-PM.jpg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-17-183743_005.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-17-183743_006.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-14-225834_002.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-14-225834_003.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-14-225834_010.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-14-225834_011.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-15-145446_007.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-17-203357_002.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
signal-2023-10-17-203409_002.jpeg Hawker Hunter (MK1 or MK58) 550mm, 30mm edf jet
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.2k views
  • 19 likes
  • 33 downloads
  • 1 comment
License
Usages
3D design format
4 files (PDF and ZIP) Close
  • Hawker Hunter 550mm assembly manual.pdf
  • Hawker Hunter part files.zip
    • bonus extra items.zip
    • bonus extra items/1mm wire lock/fff/push rod lock 1mm.factory
    • bonus extra items/1mm wire lock/G-CODE/1mm wire stop clamp A + B.gcode
    • bonus extra items/1mm wire lock/stl/1mm wire stop clamp A .stl
    • bonus extra items/1mm wire lock/stl/1mm wire stop clamp B.stl
    • bonus extra items/CoG balancer/FFF/balancer long arm version.factory
    • bonus extra items/CoG balancer/FFF/balancer shot arm (600mm model) version.factory
    • bonus extra items/CoG balancer/G-CODE/balancer long arm version.gcode
    • bonus extra items/CoG balancer/G-CODE/balancer shot arm (600mm model) version.gcode
    • bonus extra items/CoG balancer/STL/arm.stl
    • bonus extra items/CoG balancer/STL/base plate.stl
    • bonus extra items/CoG balancer/STL/long arm.stl
    • Cura profiles.zip
    • Cura profiles/COLORFABB LW-PLA.curaprofile
    • Cura profiles/PLA_direct_drive.curaprofile
    • Cura profiles/REGULAR PLA.curaprofile
    • cura settings.pdf
    • part files/fff/fuselage/canopy front.factory
    • part files/fff/fuselage/canopy rear.factory
    • part files/fff/fuselage/edf cover.factory
    • part files/fff/fuselage/edf ring.factory
    • part files/fff/fuselage/fuse 1.factory
    • part files/fff/fuselage/fuse 2.factory
    • part files/fff/fuselage/fuse 3.factory
    • part files/fff/fuselage/fuse 4.factory
    • part files/fff/fuselage/fuse 5.factory
    • part files/fff/fuselage/mk58 variant/fuse 1.factory
    • part files/fff/fuselage/mk58 variant/fuse 2.factory
    • part files/fff/printed hinge.factory
    • part files/fff/tail/elevator left.factory
    • part files/fff/tail/elevator right.factory
    • part files/fff/tail/horizontal stabilisers.factory
    • part files/fff/tail/tail tip.factory
    • part files/fff/tail/vertical stabiliser.factory
    • part files/fff/wings/aileron left.factory
    • part files/fff/wings/aileron right.factory
    • part files/fff/wings/mk58 variant/wing middle left.factory
    • part files/fff/wings/mk58 variant/wing middle right.factory
    • part files/fff/wings/mk58 variant/wing outer left.factory
    • part files/fff/wings/mk58 variant/wing outer right.factory
    • part files/fff/wings/wing inner left.factory
    • part files/fff/wings/wing inner right.factory
    • part files/fff/wings/wing outer left.factory
    • part files/fff/wings/wing outer right.factory
    • part files/gcode/Fuselage/canopy front (clear pla).gcode
    • part files/gcode/Fuselage/canopy rear.gcode
    • part files/gcode/Fuselage/edf cover.gcode
    • part files/gcode/Fuselage/edf ring (PLA).gcode
    • part files/gcode/Fuselage/Fuselage 1.gcode
    • part files/gcode/Fuselage/Fuselage 2.gcode
    • part files/gcode/Fuselage/fuselage 3.gcode
    • part files/gcode/Fuselage/fuselage 4.gcode
    • part files/gcode/Fuselage/fuselage 5.gcode
    • part files/gcode/Fuselage/mk58 variant/fuse 1.gcode
    • part files/gcode/Fuselage/mk58 variant/fuse 2.gcode
    • part files/gcode/printed hinge.gcode
    • part files/gcode/tail/elevator left.gcode
    • part files/gcode/tail/elevator right.gcode
    • part files/gcode/tail/horizontal stabilisers.gcode
    • part files/gcode/tail/tail tip.gcode
    • part files/gcode/tail/vertical stabiliser.gcode
    • part files/gcode/wings/aileron left.gcode
    • part files/gcode/wings/aileron right.gcode
    • part files/gcode/wings/mk58 variant/wing middle left.gcode
    • part files/gcode/wings/mk58 variant/wing middle right.gcode
    • part files/gcode/wings/mk58 variant/wing outer left.gcode
    • part files/gcode/wings/mk58 variant/wing outer right.gcode
    • part files/gcode/wings/wing inner left.gcode
    • part files/gcode/wings/wing inner right.gcode
    • part files/gcode/wings/wing outer left.gcode
    • part files/gcode/wings/wing outer right.gcode
    • part files/stl/fuselage/BED DISK.stl
    • part files/stl/fuselage/canopy front.stl
    • part files/stl/fuselage/canopy rear.stl
    • part files/stl/fuselage/edf cover front.stl
    • part files/stl/fuselage/edf cover rear.stl
    • part files/stl/fuselage/edf ring.stl
    • part files/stl/fuselage/fuselage 1.stl
    • part files/stl/fuselage/fuselage 2.stl
    • part files/stl/fuselage/fuselage 3.stl
    • part files/stl/fuselage/fuselage 4.stl
    • part files/stl/fuselage/fuselage 5.stl
    • part files/stl/fuselage/mk58 variant/fuse 1.stl
    • part files/stl/fuselage/mk58 variant/fuse 2.stl
    • part files/stl/printed hinge.stl
    • part files/stl/tail/BED DISK.stl
    • part files/stl/tail/elevator inner left.stl
    • part files/stl/tail/elevator inner right.stl
    • part files/stl/tail/elevator outer left.stl
    • part files/stl/tail/elevator outer right.stl
    • part files/stl/tail/horizontal stabiliser left.stl
    • part files/stl/tail/horizontal stabiliser right.stl
    • part files/stl/tail/tail tip.stl
    • part files/stl/tail/vertical stabiliser.stl
    • part files/stl/tail/vertical stabilizer tip.stl
    • part files/stl/wings/aileron inner left.stl
    • part files/stl/wings/aileron inner right.stl
    • part files/stl/wings/aileron outer left.stl
    • part files/stl/wings/aileron outer right.stl
    • part files/stl/wings/BED DISK.stl
    • part files/stl/wings/mk58 variant/wing middle left.stl
    • part files/stl/wings/mk58 variant/wing middle right.stl
    • part files/stl/wings/mk58 variant/wing outer left.stl
    • part files/stl/wings/mk58 variant/wing outer right.stl
    • part files/stl/wings/wing inner left.stl
    • part files/stl/wings/wing inner right.stl
    • part files/stl/wings/wing outer left.stl
    • part files/stl/wings/wing outer right.stl
  • QX30mm 7000kv EDF upgrades.zip
    • 30mm impeller/fff/70mm pitch 4 blade.factory
    • 30mm impeller/fff/70mm pitch 5 blade.factory
    • 30mm impeller/fff/70mm pitch 6 blade.factory
    • 30mm impeller/fff/70mm pitch 7 blade.factory
    • 30mm impeller/gcode/70mm pitch 4 blade.gcode
    • 30mm impeller/gcode/70mm pitch 5 blade.gcode
    • 30mm impeller/gcode/70mm pitch 6 blade.gcode
    • 30mm impeller/gcode/70mm pitch 7 blade.gcode
    • 30mm impeller/README - Print settings and fan (thrust-amp) test results.txt
    • 30mm impeller/stl/70p 4b v1.2.stl
    • 30mm impeller/stl/70p 5b v1.2 265g.stl
    • 30mm impeller/stl/70p 6b v1.2.stl
    • 30mm impeller/stl/70p 7b v1.2.stl
    • shaft centering tool/FFF/shaft centering tool.factory
    • shaft centering tool/g-code/housing mount.gcode
    • shaft centering tool/read me.txt
    • shaft centering tool/stl/housing mount.stl
    • shaft centering tool/stl/shaft mount.stl
  • hawker hunter 550mm print settings.pdf

Learn more about the formats
Last update 2024-04-15 at 09:30
Publication date 2023-10-17 at 16:49
Design number 1520096
3D_Aeroworks

3D_Aeroworks

3D printer file info

3D model description

This replica of the Hawker Hunter is designed for quick and easy construction and printed using lightweight PLA (LW-PLA). Designed to suit the QX 30mm edf this model has loads of power and is happy to cruise around at 60% power thanks to its lightweight yet sturdy construction. Utilizing just 3 channel controls; aileron, elevator and throttle, this model performs extremely well given its small size and lightweight.

Build options - This model comes with the option to build it as a MK1 or a MK58 (hunter F6) . The additions of the Sabrinas and sawtooth wing which gave the Hunter its distinctive appearance. The files are setup to print stock as the MK1, for the MK58 - simply select the files from the alternate folder (MK58) folder and print them in place of the standard MK1 version. The only files which are specific to the MK58 are:

  • fuse 1 and 2
  • wings middle and outer

The rest of the parts are universal to both variants.

TEST FILES available here:

https://cults3d.com/en/3d-model/various/hawker-hunter-550mm-30mm-edf-jet-test-files

Flight video:

https://www.youtube.com/watch?v=mng_m5_Tn1s

https://www.youtube.com/watch?v=QudbotJyxss

This model is recommended for the pilots with late beginner to intermediate level skills.

Included with this file:

Factory files for Simplify 3d
STL files for all components
G-CODE for all files
CURA Profiles for LW-PLA and regular PLA
Detailed assembly manual and user guide
Print settings guide for all parts

part orientation images

GENERAL SPECIFICATIONS:

CG location is on the indentation markings on the top side of the wing. balance inverted.

WINGSPAN 550mm

LENGTH 662mm

PRINT WEIGHT 200g

FLYING WEIGHT 340g

CHANNELS: 3 (aileron, elevator, throttle)

MINIMUM PRINT VOLUME:
200x200x200

REQUIRED COMPONENTS:
X1 QX motor 30mm edf 7000kv
X1 15amp esc
X1 650mah 3s LIPO OR SIMILAR (115g)
X3 3.7g Micro servo
Bamboo skewers 3mm
Heat shrink tube 3mm
X2 10mm X 10mm X 2mm Magnet (ROUND)
X10 Micro hinges (OPTIONAL)
Velcro
x2 1mm Piano wire (min length 320mm)
x1 m2 linkage stopper.

RCgroups forum thread for important information POST #1
https://www.rcgroups.com/forums/showthread.php?4427141-Hawker-hunter-550mm-30mm-edf

For any questions and assistance please email us at:

aeroworks3d@outlook.com

Categories

All designs β€Ί Various

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.