AEXSCT01 - Great Chests

This set contains 21 models of chests plus dragonbite compatible tiles to use for interior spaces. These chests were made by Aether Studios artists Ben Gayer, Colin Christenson, Nasos Maloudis, Carl Csurgo, and Will Walker for the amazing patrons who support us.

You can get this set plus 1300 other quality .stl files in our patron welcome pack Or on MMF Tribes just for joining!

We are William Walker, Colin Christenson, Jacob Armor, Nasos Maloudis, Tia Norah, Ben Gayer, Jeromy K. Smith, Marc Weatherhogg, Jason Surlock, Jonathan Laager, and Károly Csúrgó of Aether Studios.

Thank you for downloading this set and supporting us. If for any reason you need to contact us, please don’t hesitate to email William at will@aether-studios.com

/images/12782/_product_images/396752/Dragonbite-1.jpg

TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size​: 0.15mm minimum. 0.1mm recommended.
Infill​: 10% for all models recommended
Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports​: Larger Terrain pieces can suffer with lightning infill.

MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None