Evo Fox - cosplay mask - digital stl file for 3D-printing 3D print model

This is my personal design of futuristic fox mask. The mask will fit a head 15 to 16.5cm wide. The wall thickness of the model is 3mm. Ready for printing by parts, includes obj, stl, zip.

Includes two different versions of mask slicing. choose the one that is convenient for you. For assembly, you can use glue or screws 3.5x6.5 mm

Attention! Some files should be printed in 2 copies. the second part must be mirrored during slicing.

If you want to make glowing eyes i suggest using transparent filament to print diffusers. As a light source, you can use 4-5pcs 3mm LEDs. To install them in the diffuser, you will need to drill the number of holes you need in the diffuser. Or you can write to me and I will make the required number of holes for you. For a better glowing effect of diffusers, you can cast clear plastic or resin diffusers. You can find an example of this in my instagram @RTprops

Don't forget to check back plate file in my profile. It will allow you to wear your mask more comfortably!

I don’t mind if you’re going to sell masks made using my models. My big request is to tagging me in Instagram in your posts (@RTprops). Also please do not forget to your feedback, it is very important for me :)

UPDATES 23 SEP 2023: added archive solid mask v2.zip, which contains updated files for the mask not divided into spare parts. Fixed mesh problems including self-intersections. 3 MAY 2024: added file EvoFox v4.zip, which contains updated files. Fixed some minor mesh errors.