Rogal Door Battle Tank 3D print model

Rogal Door Battle Tank for Battlemace 40 million Astral Guard army. The tank was inspired by a Rogal Dorn battle tank, that has not been released as of writing this - therefore the exact measurments might be off by a couple of milimeters - i will most likely update it to fit the exact dimensions later on and simply add/modify the files. Each part has a redundant geometry feature(s) located in normally non-visible areas that allow for painless assembly, if printed right. The sponson weapon slots and sponson weapons were made to be compatible with parts made by other modelers/companies.

DISCLAIMER - Tank on the photos is without tracks not because they are not included, but because putting them on in a simulation proved to be nigh impossible. I will submit photos of the assembled model once it's ready.

As of now, the files contain:

Tank parts:

• Hull
• 1 Side with a sponson slot (mirror it in slicer to get a second part)
• 2 Sponsons
• Tracks of various lengths (1-6 link long) (mirror them in slicer to get tracks for the second side)
• Turret (hatches closed)

Weapons:

• Oppressive cannon
• Twin combat cannons
• Pintle stubgun
• Hull gatling gun
• Hull powderiser cannon
• Front stubgun
• Front melter gun
• Sponson Heavy nailer
• Sponson Multi melter
• Side panels
• Sponsonless sides
• Frontal caps (no front weapons version)

Coming soon:

• Track guards

Edit: It took me a while, but here is the update. It contains Sponsonless Sides, Wheel guards, Frontal caps and Twin combat cannon. Enjoy! Edit 2: I just realized how badly designed for printing was the pillar in the turret that connected it with the main hull. I replaced it with a better solution - a Turret an a Turret pillar.

Model parts are not presupported.

These models were inspired by models made by Games Workshop. I am the author of these 3d models and I own them. You are not allowed to spread them without my permission, nor profit from them.