Skip to content

Umarex T4E XT68 X-tracer 68, Empire Dfender M249 SAW Minimi tracer mount

1-DFender-saw-XT68-mount.jpg Umarex T4E XT68 X-tracer 68, Empire Dfender M249 SAW Minimi tracer mount
2-UNW-SAW-XT68-mount-green.jpg Umarex T4E XT68 X-tracer 68, Empire Dfender M249 SAW Minimi tracer mount
3-saw-XT68-AIM-1.jpg Umarex T4E XT68 X-tracer 68, Empire Dfender M249 SAW Minimi tracer mount
4-saw-XT68-AIM-2.jpg Umarex T4E XT68 X-tracer 68, Empire Dfender M249 SAW Minimi tracer mount

🔫 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.4k views
  • 1 like
  • 2 downloads
  • 3 collections
License
3D design format
TXT and ZIP Folder details Close
  • 12INCH XT68.zip
    • 12 inch XT68 21 20mm.stl
    • 12 inch XT68 21 40mm.stl
    • 12 inch XT68 21 60mm.stl
    • 12 inch XT68 21 80mm.stl
    • 12 inch XT68 22 00mm.stl
    • 12 inch XT68 22 20mm.stl
    • 12 inch XT68 22 40mm.stl
    • 12 inch XT68 22 60mm.stl
    • 12 inch XT68 22 80mm.stl
    • 12 inch XT68 23 00mm.stl
    • 12 inch XT68 23 20mm.stl
    • 12 inch XT68 23 40mm.stl
    • 12 inch XT68 23 60mm.stl
    • 12 inch XT68 23 80mm.stl
    • STEP/12 inch XT68 21 20mm.step
    • STEP/12 inch XT68 21 40mm.step
    • STEP/12 inch XT68 21 60mm.step
    • STEP/12 inch XT68 21 80mm.step
    • STEP/12 inch XT68 22 00mm.step
    • STEP/12 inch XT68 22 20mm.step
    • STEP/12 inch XT68 22 40mm.step
    • STEP/12 inch XT68 22 60mm.step
    • STEP/12 inch XT68 22 80mm.step
    • STEP/12 inch XT68 23 00mm.step
    • STEP/12 inch XT68 23 20mm.step
    • STEP/12 inch XT68 23 40mm.step
    • STEP/12 inch XT68 23 60mm.step
    • STEP/12 inch XT68 23 80mm.step
  • 14INCH XT68.zip
    • 14 inch XT68 21 20mm.stl
    • 14 inch XT68 21 40mm.stl
    • 14 inch XT68 21 50mm.stl
    • 14 inch XT68 21 60mm.stl
    • 14 inch XT68 21 70mm.stl
    • 14 inch XT68 21 80mm.stl
    • 14 inch XT68 22 00mm.stl
    • 14 inch XT68 22 20mm.stl
    • 14 inch XT68 22 40mm.stl
    • 14 inch XT68 22 60mm.stl
    • 14 inch XT68 22 80mm.stl
    • 14 inch XT68 23 00mm.stl
    • 14 inch XT68 23 20mm.stl
    • 14 inch XT68 23 40mm.stl
    • 14 inch XT68 23 60mm.stl
    • 14 inch XT68 23 80mm.stl
    • STEP/14 inch XT68 21 20mm.step
    • STEP/14 inch XT68 21 40mm.step
    • STEP/14 inch XT68 21 50mm.step
    • STEP/14 inch XT68 21 60mm.step
    • STEP/14 inch XT68 21 70mm.step
    • STEP/14 inch XT68 21 80mm.step
    • STEP/14 inch XT68 22 00mm.step
    • STEP/14 inch XT68 22 20mm.step
    • STEP/14 inch XT68 22 40mm.step
    • STEP/14 inch XT68 22 60mm.step
    • STEP/14 inch XT68 22 80mm.step
    • STEP/14 inch XT68 23 00mm.step
    • STEP/14 inch XT68 23 20mm.step
    • STEP/14 inch XT68 23 40mm.step
    • STEP/14 inch XT68 23 60mm.step
    • STEP/14 inch XT68 23 80mm.step
  • PIC.zip
  • READ ME SAW XT68mount.txt
  • XT68 airport travel cap.zip
    • tracer ring.step
    • tracer ring.stl
    • READ ME XT68mount.txt

Learn more about the formats
Publication date 2023-05-12 at 09:02
Design number 1216349
UntangleART

UntangleART

3D printer file info

3D model description

this mount makes it possible to mount a tracer unit on your Empire Dfender with M249 saw kit marker, that can also simulate gun flashes making also usable with normal paint at low light conditions it doesn’t have to be pitch black. but I don’t think there is a tat you will see it’s effects on a open field in the middle of the day. but in a building this should be a different story even during the day. but of course it will be more noticeable how darker it’s the gun flash simulation works on the fact that it lightens up the gas cloud a paintball marker makes. so the more air volume is going out of the marker and how more it forms a cloud the bigger the blast effect is. note this really a short blast. so if you blink you will mis it haha. and some times cameras happen to mis the shot. but well that is why you have more than 1 rounds haha…

-
tracer options for 68 cal
you got for what I have seen now 2 options for the 68 cal markers

the ACETECH Quark-R (Quark-M) the Quark-M sits inside the tracer that is called the Quark-R. the unit can lighten up green and Red tracer rounds. and it can make a wide spectrum of colored gun flashes

the Umarex T4E X-tracer 68
this tracer is smaller then the Quark-R/M also this model is made for paintball so it doesn’t need to mod to make it suited for paintball use.
this tracer only works for green Tracer rounds. and can only simulate the orange gun flash colors.

-

compatibility note
make sure you select the right mounting option since they all need to be costume made so that barrel alines with the tracer properly!
and select the correct tracer model!

so this one is for the empire dfender with the M249 Saw Minimi kit and with the use of a 12 inch or 14 inch barrel. for longer barrels look for the barrel mounted options
https://cults3d.com/en/3d-model/various/unw-m249-saw-fn-minimi-kit-for-empire-d-fender-paintball-marker

and Umarex T4E XT68 X-tracer 68 tracer unit.

also keep in mind that your safety “barrel plug” or barrel sock works with this set up

I will make a TIPX style of barrel plug that will fit this tracers and add it to the collection.

movie link:
https://youtu.be/Gj-XHxpkgTo

-
Materials needed

use the, (US gasblock 12 and 14 inch APEX2 cut) part to lock in the tracer mount

1x O-ring 1.2mm CS, 28mm OD, this is placed behind the tracer mount threads

3D printing settings

print settings:
0.2 layer hight will work fine. but using a 0.16 will give you a nicer print
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

I recommend that you use the orientation I have placed the files in. it’s true it cost more supports this way but you will have good threats and that is want matters in the end.

Categories

All designs › Various › Sports & outdoor

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.