Dodge SRT Demon Big Logo for LED 2 Versions

Hello friend, I wanted to bring on my profile, a very interesting project, which can be very interesting to those who love this fantastic Dodge SRT Demon logo.

The logo is really very large, the size of the plate you need to have to print my project is 250 x 250 millimeters, the back of the face of the demon, has the eye with the slot to insert the led, instead, the rest of the writing, is all emptied inside, so behind you can put the LEDs to illuminate it.

Dear friend, if you do not find the logo you like in my profile, contact me in the messages section, I will be happy to create for you the logo you love, and publish it here on my profile.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance "tolerance standard of all printers"If you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good print my friends for anything, contact me via messages.

Layer 0.15 / 0.20
Temp 205° / 50° PLA --- 230° / 65° PETG
Infill 10%
Top and Bottom Layer 4
Perimeter Layer 3
Speed 50/60 mm/s