5-5-2024
Mag catch bar Partisan version added
4 -5-2024
stingray mag catches file cleaned up.
M1D Left side export error fixed
UNW trigger model have been added
2-5-2024 stingray mag catch bars added
the BIG 2024 project update status: complete
Parts: all parts are updated
manuals : all manuals have been updated
the parts list can be found here
https://drive.google.com/drive/folders/1XBZvTm_s3VLk_iqTnINIyMt30BXmXn8h
A BIG 2024 project update is a view weeks away!!!
so my recommendation is to put your build on hold.
Barrel / UNW hop up unit will be updated
Bolts will be updated
bolt front caps
internal pars will be updated
and the manual
why? Better FPS/joule out putt
a more easy and relabel build
better nozzle support
nozzle spring guide (is all ready a beta thing)
For beta user keep in mind that Iβm working and testing parts that are newer then the beta parts.
When this update is done and itβs confirmed that it is good update. Then there will be 2 alternate models added over time. The stingray, and partisan 6 edition of this project. In a H and BL version
5-3-2024
(cults3d note, at the moment Iβm working on a lot of improvements so keep a eye on the discord and printbels for some bata parts. After that is closed the cults3d version will be fully updated)
to day I discovered that I made a error with the nozzle spring placement. so even do the spring guide helps. do I recommend to reprint the bolt front! to prevent nozzle spring damage
also I have added support for the WE / AW G 18 nozzle
the TM model is still a work in progress
Β
ββββββββββββββββ
ID 13,70mm pistonβ β options
ββββββββββββββββ
supported nozzles for bolt front model: KJW PK13 17Β
KJW KP13 , KJW KP13c,β β KJW KP17,Β
supported nozzles for bolt front model: G 17 WE AWΒ
WE G 17, WE, G 19, WE G 27, WE G 34,Β
AW VX01, AW VX0100, AW VX0101, AW VX0111, AW VX7, AW VX9,Β
G-force 17, G-force 19,Β
supported nozzles for bolt front model: G 18 WE AWΒ
WE G 18c, WE G 23, WE G 26,Β
AW VX02, AW, AW VX0200, AW VX0201, VX0210, AW VX0211, AW VX8,β βΒ
G-force 18c,Β
ββββββββββββββββ
ID 13.40mm piston optionsβ β .Β
ββββββββββββββββ
supported nozzles for bolt front model: TM G 17
TM G 17, TM G 19, TM G 22, TM G 26. TM G 34, (gen 3βs)βΒ
16-12-2023
bolt fronts with spring guide have been added
https://youtu.be/Z7I6xw9x5wM
and the extended charging handle bushings for MKII users that was made for the FA models in case you prefer that model.
11-12-2023 Lockpin / project streamlining update
the lowers
have been switched for the H model lower.
These can be used for FA, BL and H models.
In case for old H uses: itβs not necessary to reprint the lower. But for new builds itβs recommended to use the new parts of course
the uppers
the uppers have been updated to the H model upper that will work for BL and SF models as well
and a UNW hopup cut out have been applied.
In case for old H uses: itβs very easy to mod it for the new hopup system, so no need to reprint things.
Bolts
the bolts are now lock pin ready, besides that there are no big updates made on them.
Also Keep in mind that a SF bolt can also work as a semi auto bolt for a H build in case you want to have more flexibility. In regards to semi auto and full auto fire options later on
https://www.printables.com/model/676226-fgc-6sf-parts-set-for-fgc-6h-and-fgc-6bl-parts-set
Bolt fronts
they have been updated to work with the new UNW hop up unit (beta)
https://www.printables.com/model/670322-fgc-6-unw-hop-up-unit-beta-version
31-08-2023 Manuals have been updated
-
3-9-2023
trigger part improved (less clean up for spring)
12-9-2023
the day I became aware... that I for got to upload the H Lower's!
16-9-2023β¨trigger update (old one works fine, just a ease of install update)β¨β¨stock MKII shroud and rail added
-
5-10-2023
PDF's updated
12-10-2023
new V2 hammer added. improvements are tested on the SF and should also be better on H and BL models. but I leave the old model in te set just in case you find it a better model
-
13-10-2023
new v3 hammer added this one is definitely a replacement for the gen 1 hammer. but I will explain the difference in a video so you can see what the V1 , v2 v3 is all about
-
the moment is finally here. the FGC-6 now called FGC-6H is finally here after a lot of chances to replicate the FGC-9 as close as possible as a airsoft model is it finally here.
in case you want to read more about the FGC-6H and his side projects before you start building one. then look at the PDF: FGC6 project explained
this kit comes with a lot of options! so read the PDFβs well before you start so you know what to select to print and buy.
this project have been tested with green gas, red gas and HPA and it got a working range with the current springs of 80/90 up to 140 Psi on HPA.
look for shrouds and stock in the FGC-6H MKI or MKI collections
FGC-6H MKI and Hybrid link:
https://cults3d.com/en/design-collections/UntangleART/fgc-6-h-mki
https://www.printables.com/@UntangleWORKS/collections/451551
FGC-6H MKII / MKIISD link:
https://cults3d.com/en/design-collections/UntangleART/fgc-6-h-mkii
https://www.printables.com/@UntangleWORKS/collections/451552
the advanced parts will be released in a separate package. note: only use them as fine tuning and experimental parts! your FGC-6H should work with the parts provided in this starter kit.
movie link:
roller bearing hammer
https://youtu.be/jsGwoxNXUaY
upper sand tool
https://youtu.be/-QtMWLSduyY
FGC-6H: how it works and comparing the heavy bolt vs normal bolt
https://youtu.be/LdJmSrGvDCI
FGC-6H the it finally works announcement for the hammer fired airsoft replica of the FGC-9
https://youtu.be/10zl7eHIfk8
FGC-6 maple leaf hopup unit assembly we tech, TM, marui, VFC, gbb airsoft glock series
https://youtu.be/Lk3ifY9NuhU
note to printable users: you have to scroll down and also download all other files! to get you hands on the PDFβs
