Skip to content

Ursus Rex-Pattern Super Heavy Battle Tank

0-Presentationshot.png Ursus Rex-Pattern Super Heavy Battle Tank
1.png Ursus Rex-Pattern Super Heavy Battle Tank
2.png Ursus Rex-Pattern Super Heavy Battle Tank
3.png Ursus Rex-Pattern Super Heavy Battle Tank
4-Size-Comparison.png Ursus Rex-Pattern Super Heavy Battle Tank
5-Angle-Comparison.png Ursus Rex-Pattern Super Heavy Battle Tank
5-Baneblade.png Ursus Rex-Pattern Super Heavy Battle Tank
6-Hellhammer.png Ursus Rex-Pattern Super Heavy Battle Tank
7-Banesword.png Ursus Rex-Pattern Super Heavy Battle Tank
8-Shadowsword.png Ursus Rex-Pattern Super Heavy Battle Tank
9-Stormsword.png Ursus Rex-Pattern Super Heavy Battle Tank
10-Doomhammer.png Ursus Rex-Pattern Super Heavy Battle Tank
11-Banehammer.png Ursus Rex-Pattern Super Heavy Battle Tank
12-Stormlord.png Ursus Rex-Pattern Super Heavy Battle Tank
13-Rear-Transport-Deck.png Ursus Rex-Pattern Super Heavy Battle Tank
14-Rear-Fixed-Turret.png Ursus Rex-Pattern Super Heavy Battle Tank
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 9.4k views
  • 77 likes
  • 74 downloads
  • 6 collections
  • 4 comments
License
3D design format
ZIP Folder details Close
  • FDM-Pack.zip
    • 1a - Hull Middle Left.stl
    • 1b - Hull Middle Right.stl
    • 1c - Hull Front.stl
    • 1d - Engine Block.stl
    • 1e - Hull Modules/Demolisher Cannon Housing Bottom.stl
    • 1e - Hull Modules/Demolisher Cannon Housing Top.stl
    • 1e - Hull Modules/Demolisher Replacement Section.stl
    • 2+3 - Skirts/2a - Skirt Front Left Inside.stl
    • 2+3 - Skirts/2b - Skirt Front Left Outside.stl
    • 2+3 - Skirts/2c - Skirt Mid Left Inside.stl
    • 2+3 - Skirts/2d - Skirt Mid Left Outside.stl
    • 2+3 - Skirts/2e - Skirt Rear Left Inside.stl
    • 2+3 - Skirts/2f - Skirt Rear Left Outside.stl
    • 2+3 - Skirts/3a - Skirt Front Right Inside.stl
    • 2+3 - Skirts/3b - Skirt Front Right Outside.stl
    • 2+3 - Skirts/3c - Skirt Mid Right Inside.stl
    • 2+3 - Skirts/3d - Skirt Mid Right Outside.stl
    • 2+3 - Skirts/3e - Skirt Rear Right Inside.stl
    • 2+3 - Skirts/3f - Skirt Rear Right Outside.stl
    • 4 - Tracks/4a - Tracks Front Left Center Inner.stl
    • 4 - Tracks/4b - Tracks Front Left Center Outer.stl
    • 4 - Tracks/4c - Tracks Front Left Inner.stl
    • 4 - Tracks/4d - Tracks Front Left Outer.stl
    • 4 - Tracks/4e - Tracks Front Right Center Inner.stl
    • 4 - Tracks/4f - Tracks Front Right Center Outer.stl
    • 4 - Tracks/4g - Tracks Front Right Inner.stl
    • 4 - Tracks/4h - Tracks Front Right Outer.stl
    • 4 - Tracks/4i - Tracks Rear Left Center Inner.stl
    • 4 - Tracks/4j - Tracks Rear Left Center Outer.stl
    • 4 - Tracks/4k - Tracks Rear Left Inner.stl
    • 4 - Tracks/4l - Tracks Rear Left Outer.stl
    • 4 - Tracks/4m - Tracks Rear Right Center Inner.stl
    • 4 - Tracks/4n - Tracks Rear Right Center Outer.stl
    • 4 - Tracks/4o - Tracks Rear Right Inner.stl
    • 4 - Tracks/4p - Tracks Rear Right Outer.stl
    • 5 - Fixed Turret/5a - Fixed-Turret Center Front (SHS,BS,STS).stl
    • 5 - Fixed Turret/5b - Fixed-Turret Center Rear (SHS,BS,STS).stl
    • 5 - Fixed Turret/5c - Fixed-Turret Left (SHS,BS,STS) Front.stl
    • 5 - Fixed Turret/5d - Fixed-Turret Left (SHS,BS,STS) Rear.stl
    • 5 - Fixed Turret/5e - Fixed-Turret Right (SHS,BS,STS) Back.stl
    • 5 - Fixed Turret/5f - Fixed-Turret Right (SHS,BS,STS) Front.stl
    • 5 - Fixed Turret/Quake Cannon (Banesword).stl
    • 5 - Fixed Turret/Siege Cannon (Stormsword).stl
    • 5 - Fixed Turret/Volcano Cannon (Shadowsword).stl
    • 5 - Transport Deck/5a - Firing Deck Turret Bottom.stl
    • 5 - Transport Deck/5b - Firing Deck Turret Top.stl
    • 5 - Transport Deck/5c - Rear Firing Deck Bottom.stl
    • 5 - Transport Deck/5d - Rear Firing Deck Top.stl
    • 5 - Transport Deck/Magma Cannon (Doomhammer).stl
    • 5 - Transport Deck/Tremor Cannon (Banehammer).stl
    • 5 - Transport Deck/Vulcan Mega-Bolter Bottom.stl
    • 5 - Transport Deck/Vulcan Mega-Bolter Top.stl
    • 5 - Turret/5a - Elevated Chassis Bottom.stl
    • 5 - Turret/5b - Elevated Chassis Top.stl
    • 5 - Turret/5c - Baneblade Turret Bottom.stl
    • 5 - Turret/5d - Baneblade Turret Top.stl
    • 5 - Turret/Baneblade Cannon W Coaxial Autocannon Bottom.stl
    • 5 - Turret/Baneblade Cannon W Coaxial Autocannon Top.stl
    • 5 - Turret/Baneblade Cannon W Coaxial Autocannon.stl
    • 5 - Turret/Hellhammer Cannon W Coaxial Autocannon Bottom.stl
    • 5 - Turret/Hellhammer Cannon W Coaxial Autocannon Top.stl
    • 5 - Turret/Hellhammer Cannon W Coaxial Autocannon.stl
    • 6 - Hull and Sponson Weapons/Heavy Bolter (Hull, Front) Bottom.stl
    • 6 - Hull and Sponson Weapons/Heavy Bolter (Hull, Front) Top.stl
    • 6 - Hull and Sponson Weapons/Single Heavy Bolter Bottom.stl
    • 6 - Hull and Sponson Weapons/Single Heavy Bolter Top.stl
    • 6 - Hull and Sponson Weapons/Single Heavy Flamer Bottom.stl
    • 6 - Hull and Sponson Weapons/Single Heavy Flamer Top.stl
    • 6 - Hull and Sponson Weapons/Single Lascannon Bottom.stl
    • 6 - Hull and Sponson Weapons/Single Lascannon Top.stl
    • 6 - Hull and Sponson Weapons/Twin Heavy Flamer (Hull, Front) Bottom.stl
    • 6 - Hull and Sponson Weapons/Twin Heavy Flamer (Hull, Front) Top.stl
    • 6 - Hull and Sponson Weapons/Twin Lascannon (Hull, Front) Bottom.stl
    • 6 - Hull and Sponson Weapons/Twin Lascannon (Hull, Front) Top.stl
    • Auspex.stl
    • Hatch.stl
    • Standard-Pin-Tool.stl
    • Track-Pin-Tool.stl
    • Ursus-Rex FDM Instructions.txt
  • V2 - Ursus-Rex Super Heavy Tank.zip

Learn more about the formats
Last update 2023-09-19 at 02:02
Publication date 2023-08-13 at 19:22
Design number 1383658
MaelstromDesignworks

MaelstromDesignworks

3D printer file info

3D model description

The Ursus Rex-Pattern Super Heavy Battle Tank designed for the hardest targets, the most difficult missions, the grandest fields of battle. The crown jewel of any Imperial Armored Regiment, the Ursus Rex builds off of the massively robust Ursus platform, dwarfing its smaller cousins with the sheer weight of crushing metal and a bewildering amount of weaponry.

From slaying the largest monsters to stalk the galaxy to decimating entire traitor platoons, the Ursus-Rex is one of the mightiest ground vehicles to grace the battlefield. Capable of being retrofitted with its monumental arsenal (with proper Techpriest rites and sanctified oils) it can be equipped for any task.

Model measures 245mm x 144mm x ~90mm. (Varying height depending on turret configuration).

Uses 5x2mm magnets.

Warning: Largest presupport part is the middle hull section at 145x90x137mm. This can be sliced how ever you need it though as any seam lines will be covered by adjoining pieces. The vast majority of the presupported pieces should be on everything but the smallest of printers.

If there's any warpage during the print process, even slightly, you will most likely encounter difficulty constructing the main hull body by lining up the pegs. Most of the pegs are for redundancy however and can be safely cut off with clippers without damaging the final product.

Update V2: User caught an issue regarding righthand skirt (unpresupported didn't have proper peg holes for treads). Issue has been fixed and reuploaded. Presupport version is fine.

Update V3: Gemma Long is at it again with an awesome cut pack specifically made for FDM printing!

Features:
-Complete Octoblade system with full magnetization.
-Three different turret platforms (Elevated Turret, Transport, & Fixed Turret).
- Removable hatch for a tank commander.
- Remote CROWS style stubber.
- Simple, easy to print push-to-fit design.
-All weapons, sponson options, and turret accessories are fully magnetized. There is also a sponsonless 'sponson cap' for the forward and side sponsons, which also is magnetized.
- Matches size of similar tanks in wargames as a proxy.
- BB & HH turrets are cross compatible between the majority of my models, enabling you to switch them out for crazy kitbashing (IE, this turret can be put on the chassis of my Fenrir tank or Charon Apc and vise versa).
-Fully Pre-Supported. Make sure your exposure and settings are dialed into prevent failures or support scarring.

If you print this, please post it! I love to see people make my prints!
Reddit: MaelstromDesignworks
Insta: @MaelstromDesignworks

See Necrotech Printing for physical models!
https://www.necrotechprints.com/

Please report any problems you have directly to me! I'll do my best to fix any inconsistencies or errors. I generally respond the fastest on reddit or instagram as the notification system from my storefront are not the best.

3D printing settings

Test Printed on a Mono X 6k with auto-supports in Chitubox using Siraya Tech Fast ABS-Like Navy Gray

1.8s exposure
0.02mm layer height
15 bottom layers at 23s exposure
20 transition layers
60mm/s lift speed
Large parts (Turret, Skirts, Hull) hollowed at 2mm with drain holes hidden in magnet slots
Angled to approximately 45 degrees

Categories

Designs β€Ί Game β€Ί RPG tabletop / Board games / Toys

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.