Skip to content

4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023

CYCLONE-UPGRADE-DEC-2023.jpg 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
CYCLONE-UPGRADE-2-DEC-2023.jpg 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
4IN-VAC-CYCLONE-2023.jpg 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
4IN-VAC-CYCLONE-2023-GEN-1.jpg 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
4IN-VAC-CYCLONE-2023-GEN-2.jpg 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
DIM-1.jpg 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
DIM-2.jpg 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
CONE 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
CONE CONNECTOR 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
CONE GASKET 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
FRONT CONNCETOR HELIX LEFT 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
FRONT CONNCETOR HELIX RIGHT 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
FRONT CONNCETOR LISS 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
FRONT CONNCETOR LISS WITH CHANNEL 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
HOUSE LONG 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
HOUSE MED 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
HOUSE SMALL 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
TOP CONNCETOR HELIX LEFT 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
TOP CONNCETOR HELIX RIGHT 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
TOP CONNCETOR LISS 4IN VAC CYCLONE 2023.stl 4 INCH - CYCLONE SEPARATOR - BAMBU LAB VERSION - 254 X 245 X 254 MM PRINT VOLUME - JUNE 2023
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 942 views
  • 1 collection
License
Usages
3D design format
14 files (RAR and STL) Close
  • CONE 4IN VAC CYCLONE 2023.stl
  • CONE CONNECTOR 4IN VAC CYCLONE 2023.stl
  • CONE GASKET 4IN VAC CYCLONE 2023.stl
  • CYCLONE CONE BASE IN TWO VERS DEC 2023.rar
  • FRONT CONNCETOR HELIX LEFT 4IN VAC CYCLONE 2023.stl
  • FRONT CONNCETOR HELIX RIGHT 4IN VAC CYCLONE 2023.stl
  • FRONT CONNCETOR LISS 4IN VAC CYCLONE 2023.stl
  • FRONT CONNCETOR LISS WITH CHANNEL 4IN VAC CYCLONE 2023.stl
  • HOUSE LONG 4IN VAC CYCLONE 2023.stl
  • HOUSE MED 4IN VAC CYCLONE 2023.stl
  • HOUSE SMALL 4IN VAC CYCLONE 2023.stl
  • TOP CONNCETOR HELIX LEFT 4IN VAC CYCLONE 2023.stl
  • TOP CONNCETOR HELIX RIGHT 4IN VAC CYCLONE 2023.stl
  • TOP CONNCETOR LISS 4IN VAC CYCLONE 2023.stl

Learn more about the formats
Publication date 2023-07-05 at 17:42
Design number 1308103
COSTATECHNICDESIGN

COSTATECHNICDESIGN

Template info

3D model description

4 INCH CYCLONE SEPARATOR JUNE 2023 - BAMBU LAB VERSION

I TRY TO KEEP ALL DIMENSIONS UNDER 245... TO GIVE A SMALL TOLERANCE OF 10-12MM TO THE 3D PRINTER - (254 X 245 X 254 MM PRINT VOLUME) THIS UNIT WAS SPECIFICALLY DESIGN - AT A CLIENT REQUEST, FOR A BAMBU LAB PRINTER!

IN ORDER TO AVOID ANY PROBLEMS DURING PRINTING - ON THE FRONT THREAD, I DECIDED TO DESIGN A BOLTED CONNECTION! IT REQUIRED 4 SETS M6x16MM HEX BOLT + NUT. DO NOT OVERTIGHTEN! USE A GASKET SEALANT BETWEEN FACES (ON BOLTED CONNECTION ONLY!)

THIS UNIT USE A DOUBLE THREAD DESIGN, CREATED AND OPTIMISED FOR 3D PRINTING.

ARE FEW VARIATIONS OF THE DESIGN, THE "BIGGER/LONGER" THE BETTER, HOWEVER MAKE A BALANCE BETWEEN COST OF THE PRINT AND RANDAMENT OF SEPARATION!

CLEAN THE THREAD FROM ANY PRINT GLITCHES BEFORE ASSEMBLING!

DO NOT REQUIRE SUPPORT DURING PRINTING OF PARTS, IF ASA OR ABS FILAMENT IS USED, I STRONGLY RECOMMEND PRINTING INTO AN ENCLOSED SPACE, IN ORDER TO AVOID ANY WARP OR DELAMINATION. DO NOT REMOVE PART FROM THE ENCLOSURE IMMEDIATELY AFTER COMPLETION, LET IT COOL DOWN SLOWLY!

IF YOU ENCOUNTER ANY PROBLEM WITH THIS PRINT, PLEASE LET ME KNOW AND WE WILL TRY TO FIX IT TOGETHER!

GOOD LUCK AND HAPPY PRINTING!

DESIGN TO PRINT WITHOUT SUPPORT! BY COSTA

This KIT is for personal use only! Please read our policy! If you do not agree, please do not buy this product! Failure to comply with our policy will result in the immediate termination of your user license! Do not alter or modify to resale, share with others, make it public or redistribute in any form, digital or in physical form, all digital content as images, dxf, stl files, etc. Do not sell, share, makes it public or redistribute as it is in current form. Do not sale the final product! You will need a Commercial License in order to sell this final Product! For a commercial license please contact us! Without a commercial license you are allowed to sell only one unit for each kit you buy!

Thank you for your interest in our product!

Stay safe, be safe and be happy!

Manufacturing settings

DESIGN TO PRINT WITHOUT SUPPORT! BY COSTA

REQUIRED A 254 X 245 X 254 MM PRINT VOLUME.

Categories

All designs β€Ί Tools β€Ί DIY / 3D printing & accessories

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.