BMW M4 GT3 Steering Wheel V2

DIY BMW M4 GT3 steering wheel replica

Update 06/12/2022 (V2):** **

-Remade the shifters bolts holes in order to make them configurable.

-Remade the buttons grill

-Remade the buttons holes on front body

-New button caps

-Now compatible with biggers Qr like Podium Hub and NRG/Simmagic/Moza

Here is our replica of the Formula Renault steering wheel. This design includes our 3D Printable Paddles and our clutch paddles

There are different versions of this wheel. With or without screen and two different back covers. Also, this are on one piece or splited on two parts for bed sizes similar to the ender 3.

Parts:

Bolts and nuts:

M2.5:

• 10 x Button 10mm long

M3:

• 4 x Flat 20mm long

• 2 x Flat 30mm long

• 8 x Button 6mm long

• 8 x Button 16mm long

• 14 x Nuts

M4:

• 4 x Flat 30mm long

• 6 x Flat 20mm long

• 6 x Socket 24mm long

• 5 x Socket 30mm long

• 4 x Socket 40mm long

• 25 x Nuts

M5:

• 3 x Socket 35mm long

• 3 x Nuts

Electronics:

Depending in how you want to set up your wheel, you can try one pro micro and one blue pill or two pro micro.

• Blue Pill STM32 C8T6 - https://cutt.ly/hOSIzF6

• Arduino Pro Micro - https://cutt.ly/nI141Yt

• 5 x Rotary EC11 15mm long - https://cutt.ly/fOSYVtB or 3 x Bourns PEC11R-4215F-S0012 - https://cutt.ly/pGlU76L + 2 x Bourns PEC11R-4215F-N0012 - https://cutt.ly/PJoHtWw

• 12 x Buttons - https://cutt.ly/8I14v3T

• 2 x 10k Potentiometer - https://cutt.ly/bOSIB1r

• 2 x microswitches w35 - https://cutt.ly/ZUn32Nw

• 1 x 0.96'' screen I2C 4 pin White - https://cutt.ly/zGoM8N8

• 36 x PL9823 5mm Rgb Leds - https://cutt.ly/cI17wQT or 12 x red + 12 x blue + 12 x green 5mm Leds - https://cutt.ly/uGo1Tsr

Other materials/components: **

• 8 x 10x5mm Magnets - https://cutt.ly/YLbOaAr

• 2 x Axles screws - https://cutt.ly/PUn30jY

• 2 x 8mm outer diameter, 1.2mm wire diameter, 20mm long spring - https://cutt.ly/MOGbkkV

• 1 x GX12 4 pin Connector - https://cutt.ly/fI19Lns

• 1 x 4 core cable - https://cutt.ly/hOSK8cA or coiled USB cable

• 1 x 4mm thick aluminium plate

• 1 x 1mm thick acrylic or similar

The .zip file includes all the 3mf of the model, renders, .dxf files for cnc services, .step files and adapters to use on a thrustmaster and a logitech steering wheel. The diameter of the wheel is 308mm.

WARNING: This is not an easy design to build. Always remeber that you will need some previous experiences to build this wheel.

FOR PERSONAL USE ONLY - NON COMMERCIAL - NOT FOR RESALE

COPYRIGHT Canary Sim Wheel Designs - ALL RIGHTS RESERVED

You cannot sell the digital model, a derivative or adaptation of the model, nor can you sell prints of the model.

0.4 nozzle

Supports needed

0.2 layer height

Depending on the part you are printing, infill should change, as well as wall thickness.

Recommended materials: PLA+/PLA850/PLA870 and TPU(For the left and right handles)