NOTE: THIS DIGITAL FILE IS FOR LEFT GAUNTLET ONLY!
Our Mandalorian Gauntlets include a unique hinge system, rocket dart, whipcord and more! Can be printed on small format printers, or a resin printer as well.
FEATURES:
- Built In Hinge System (easy on/off without help!)
- Rocket Dart Gun (left gauntlet)
- Port for brass hose connector (left gauntlet, brass hose connector not included in digital file.)
- Attenuator (left gauntlet)
- Emitter (left gauntlet)
- Heat Sink (left gauntlet)
- Button Panel (left gauntlet)
- Power Coupler with rear hole inset for hose connector (right gauntlet, hose connector not included in digital file.)
- Whipcord with rear hole inset for hose connector (right gauntlet)
- Darts designed to be reinforced with steel rods and seated in brass tubing (right gauntlet, steel rods and brass tubing not included in digital file..)
- Control Knobs (right gauntlet)
SIZE: Left Gauntlet 248mm overall exterior length; approximately 77mm wide x 63mm high front opening; approximately 100mm wide x 100mm high rear opening.
Right Gauntlet 231mm overall length; approximately 77mm wide x 63mm high front opening; approximately 100mm wide x 100mm high rear opening; 120mm high exterior profile.
Lengths are different due to button panel on Left Gauntlet.
3D PRINTING THE M1 MANDO GAUNTLET SET:
The Gauntlets are designed to be printed in 2 pieces and assembled with the additional hardware noted below. The Gauntlets can be printed one at a time on a small 3D Printer, such as an Ender 3 (220x220x250mm), or print both on a large format printer (300x300x400mm).
π©DIY Hardware for 3D Files here π http://tiny.cc/diy-supplies
ADDITIONAL HARDWARE REQUIRED: You will need the following hardware (or similar) to complete the gauntlets build:
9x M3 x .05 x 12mm screws
9x 3mm washers
2x 2mm x 300mm stainless steel rods. (Gauntlet hinges)
4x 1mm x 50mm stainless steel rod (internal support for darts)
QUALITY CHECKED IN SIMPLIFY 3D AND TEST PRINTED: We print all the parts in our 3D MODEL FILES (STL's) to ensure you get a quality 3D Printable Model File and a functional part! In most cases, the DIY 3D Model Files that we sell are the VERY SAME FILES WE USE TO MAKE THE PHYSICAL ITEM.
PLEASE TAG US ON SOCIAL MEDIA SO WE CAN SEE IT IN THE WILD! And we'd be ever so grateful if you'd credit us with the 3D Model File used for your cosplay creation - @makerbak3d on Instagram or Facebook. Thank you!
FOR INDIVIDUAL PERSONAL USE ONLY. PLEASE DO NOT SHARE OR DISTRIBUTE FILES.
THIS IS THE WAY.
This is not an official licensed product and is only considered fan art protected under the fair-use act.
Not associated with LUCASFILM LTD. β’ or any LFL Ltd. β’ Film or Franchise. "Star Wars" is a registered trademark of LucasFilm Ltd. The Star Wars logo, characters, prop designs and names Β© LucasFilm Ltd. This document and related sites/products is not sponsored or endorsed by LucasFilm Ltd. or any of its affiliates. All Β© and β’ are property of their respected owners and are used here for comparative or descriptive purposes only.