The BeerBath ball 3D print model

After designing the WineBath I had a message from a friend of mine who said that she liked the idea but that she hated wine. Would I be making one for people who prefer beer, or other kinds of refreshing bath-time beverage? I honestly had never thought of it but on reflection she was absolutely right, so for her I designed the BeerBath. It's sized to take a standard pint glass (Take two pints into the shower? Not me, I just Chug & Go!) but as you can see from the photos it's just as happy accepting bottles or cans. The BeerBath has four suction-cups rather than the three used on the WineBath, which means it can hold a full pint and won't move. In fact I had trouble getting the prototype to let go of the door in my shower until I got the hang of removing it. Your pint is perfectly safe!

IMPORTANT: I recommend making sure you stick the BeerBath to a DRY surface (shower cubicle door, bath etc). If you stick it onto a wet surface it MAY slip downwards, so sticking it to a dry surface will give it that extra little bit of grip.

Of course it doesn't have to be used just in the bath or shower. The BeerBath will happily stick to any smooth surface so you can take your pint wherever you go. The prototype was printed in pink, mainly because it was going to my friend and also because I had a load of pink filament I wanted to use up at the time. I know not everyone would want theirs to be that colour so I've made it available in the full range of colours, just the same as the WineBath.

You'll need to find four small suction cups to make it work, but these can be found pretty cheaply on Amazon etc. Or you could buy one, fully assembled, in my Etsy store - www.etsy.com/uk/shop/enterprisexddesign