SG906 Pro Drone Leg Extensions 3D print model

Hi Guys!

A good friend of ours came in with his newly acquired drone and asked if we could create leg extensions so that it will be safer for him as a newbie pilot to operate his drone especially during the initial calibration. His primary purposes for commisioning this project is to protect the gimbal from hitting surfaces while calibrating. He also stated that the leg extension will also help to maintain safe distance between the props and objects (grass, rocks, fallen branches) on the ground during landing on uneven surfaces. After at least a liter of coffee and hours of designing, we came up with these. :)

The pictures are the actual legs specifically made for our friend's SG906 Pro Drone (thus the name in the front and his club's chapter name) We uploaded the plain version so that you can put your own name on them.

Printer: Tevo Tornado, Ender 3 Pro Layer Height: 0.12 - 0.2mm Perimeters/Shells: 2-3 Infill: 15-25% Rafts: Optional Supports: YES Material used: Carbon Fiber, PLA and ABS

Printed Height: 75mm Printing Time: 5-6hrs