AEAZSS01 - Aztlan Sewers - Starter Set
AEAZSS01 - Aztlan Sewers - Starter Set
Published 2021-04-26T10:46:44+00:00
Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn't want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.
This starter set is a full and complete series of walls, water, channels, and everything else you need to make a vast sewer dungeon. Aztlan is Will's personal favorite set and the idea of trying to do a set of sewers built by a race of snakefolk was a big goal for 2021. After his hard work on Pharaoh Fantasy Villages, Will asked Carl to take the helm for this next massive expansion. In one month together they produced over 200 models, including the 50+ included in this free set.
All of us at Aether thank Carl for breathing life into this project and helping us start the most dynamic set of sewer terrain ever.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Date published | 26/04/2021 |
Support Free | YES |
Aztlan Sewers I done in a dark yellow sand stone pallet. The base was eSun PLA+ brown with a spray of Army Painter Desert Yellow primer. After that it was just individual bricks, a strong tone wash, some dry brushing, and detail work. The miniatures (for scale and added color) are a mix of old Ral Partha and Deep Madness.