THOR AIRSOFT SPEEDLOADER

PRESENTATION

The THOR speedloader inspired by the well-known ODIN is fully printable and allows you to reload your airsoft replica magazines in record time!

The THOR speedloader is designed to be used with interchangeable adapters that you can easily create using the base file in STEP format which allows you to easily modify it with any CAD software.

It is already included adapters for :

• AR15 AEG (works with PMAGs)

• AR15 Next Gen Marui

• MP7 AEG VFC

• AR15 systema

FEATURES

• Easy to fill with beads thanks to a sliding trap door

• Only one log is lost during the reloading process

• Easily interchangeable adapter

• Limited space requirement thanks to the retractable handle

• Rotating handle for better comfort

• Easy to print

• Loader unloading tip

MATERIALS REQUIRED :

• 10 3D inserts M3x10x5 (shorter length possible)

• 6 screws M3x25 (or M3x20)

• 5 screws M3x8 (or longer)

• 1 washer M3 (not required)

• 1 pin/stem 2mm diameter and 50mm long *(or a

  30mm pin and 2 x 10mm pins)*

• 1 M8x20 screw (or longer)

• 1 M8 nut

• 1 washer M8

• 1 spring (specification not important)

MONTAGE

1.insert all the inserts in their positions in

shell 1 and also in the handle guide

2.Insert the grip into the handle guide and then screw it onto the

handle

1. fix the handle on its wheel with the two 10mm pins

4.assemble the ball drive wheel with the handle at

Using the M8 screw, do not forget the spacer. **Screw in very

tightly** while holding the handle and the drive wheel

of the balls.

5.Add the nozzle and screw in the ball guide.

6.screw the shell 2 on the shell 1

7.put the spring in place, lock it and insert the pin for

lock the whole thing!

8.You can now charge your chargers!

the link to my profile: https://cults3d.com/fr/utilisateurs/D84CONCEPTS/cr%C3%A9ations

⚠ These models are subject to the rules of CULTS and reserved for strictly private use, any reproduction for commercial purposes is prohibited ie the sale of the model, a derivative or a printed version ⚠

Material for all parts : PETG

Printing direction: refer to the images provided with the files

Media: Enabled

Hull 1 and 2 and adapters: 15%, 0.28mm

Ball drive wheel, nozzle, handle guide, locker: 30%, 0.16mm

Spacer: 100% 0.16mm

Other parts: 20% 0.2mm