M.O.A.E.T Mother Of All Ender 3's Case System

Complete Ender 3 case and new style chain system.
Includes mounts for the TFT35W and TFT43 screens
Top cover has a plexiglass window, cover with no window pending.

https://www.youtube.com/watch?v=PytKJQTVegI

This is the OEM mount version for slim Creality boards, an SKR E3 V2 is shown in the setup. An E3 turbo version will be released shortly that is 20 mm wider.
Wires do need to be extended or replaced for this mod, expect to pay $20-30 for new wires, a little more if you get a crimper kit.

X Limit switch wire short, new or extend to approximately 1100mm
Z Limit switch wire short, new or extend to approximately 1100mm(optional with BL Touch, 1.5m wire)
X Motor wire short, new or extend to approximately 1100mm
Z Motor wire short, new or extend to approximately 1100mm
Bed sensor wire short, new sensor or extend to approximately
Extend Bed Heater Wire
X wire becomes Y motor and Y limit switch
I purchased the crimping kit and heat shrink kit, made the limit switch wire with the supplied wire.
I purchased a set of for motor wires for the two motor wires, shortened one.
Made extension cable with connectors from kit for bed sensor, not easy, must be quick with solder or connector melts. Hint, plug into female to wick heat.
Solder and double shrink wrap should be ok for bed sensor, location good. made extension cable for case fan wire.

Crimping kit
https://www.amazon.com/gp/product/B07R1H3Z8X/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 (This kit gave me everything I needed except the stepper wires)

Power supply
https://www.amazon.com/gp/product/B07SSWTJT3/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

Mosfet
https://www.amazon.com/gp/product/B07C4PGXFK/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Shrink Wrap kit
https://www.amazon.com/gp/product/B07WWWPR2X/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Stepper cables (in went this route for the steppers)
https://www.amazon.com/gp/product/B07QHTG82K/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Bl Touch bracket with 1.5m cable
https://www.amazon.com/gp/product/B08G8B23L7/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

Lots of video to edit, more info to follow

Find us here
https://www.facebook.com/groups/541547619887950