Baby Yoda 4 colors in one layer.
Baby Yoda 4 colors in one layer.
Published 2020-11-30T09:48:54+00:00
Hello, thanks for choosing to print my baby yoda design.
There are few things that I need to adress before you will can print it.
First: If your bed leveling isnt good, so that model isnt for you, calibrate the bed and try again.
Second thing: Disable skirt or raft or anything you print with that isnt the print, it will collaps with the outher colors and make a mess.
Third thing: if you are printing one part with Pla lets say print them all with pla, there is a possibolity that they will not stick and the print will fucked up
Now lets check how you can print it by yourself.
There are 4 files that are diffrent parts from the model and they are called by the color of baby yoda, save those color names I'll use them later when writing the positions.
Now it's good to say that if you running ABL turn the G29 in the start of the print, and give x and y offsets to the print so it will not collaps while homing.
You are having 4 files, it dosent matter when you'll print them, the only thing to remember while printing them is to get the position right as I will show later.
You are slicing each file alone and you will got 4 Gcodes in the end, you will print them one after one, and the white as the name say print last.
Now what is the positions of the models you think?
The black and white positions on the build plate is: X0 Y0 Z0
Green position is: X0.3092 Y15.8633 Z0
suit/brown/gold position: X0.4259 Y-25.8536 Z0
(Maybe you will need to twick the position if you scaling the model)
If you need photos of the position you can find them here:
thingiverse.com/thing:4359859 (wasnt able to uploud photos here).
How I designed it using fusion360
This is pretty easy, i exported svg from photoshop to fusion360 and Extruded every color to bodys, and combine every color together. after it i was needed to make some clearens between the parts so they will not collaps, i gave a offset to each color in the sketch of 0.3mm and extruded it as cut. and cuted the model. After it i exported the models from fusion360 and fixed the positions made 4 files and send it to friend who printed it.
Thanks for checking it!
Date published | 30/11/2020 |
Support Free | YES |