Olight L-Dock (hanging or upright) wall mount
Olight L-Dock (hanging or upright) wall mount
Published 2020-06-01T15:36:43+00:00
This is my rock solid L-Dock using the included standard USB magnetic charging cable.
NOTE: This design can be used with our without the magnet.
The design includes a cavity for a15x3mm magnet, you can program in a pause print at the layer before the cavity. The model works with and without a magnet for upright or upside down mounting.
The current design holds the charger with a press fit and the optional 15x3mm Neodymium Rare Earth magnet.
The design works with the flash light upside down just like the OEM Olight L-Dock.
The bracket can be installed upright or upside down.
Compatible with Olight Brand model numbers: PERUN / S1R / S1R II / S2R / S2R II / S30R III / H1R / H2R / M2R / WARRIOR X / Seeker 2 Pro. (Tested with H1R and H2R) Let me know what you use the dock with and how it works.
The charger can be removed from the mount (with a bit of work and a small plastic tool or chop stick).
Let me know if you want to see different sized magnets or a design that allows for easier removal of the cable.
Enjoy your $30 savings :)
Be sure to use my link for $5 off!
https://www.olightstore.com/?awraf=36DFC8BF5ED15C5E1839B
Recommend using 3 perimeters.
Recommend using a .2mm elephant foot offset.
PLA, ABS, or PETG Let me know if I should include directions on stopping a print to add the magnet.
If you print without the magnet inserted there will be a void inside the print; just about any printer should be able to handle the bridging.
Date published | 01/06/2020 |
Time to do | 72 - minutes |
Material Quantity | 18 grams |
Dimensions | 33.06 x 47.55 x 50 mm |
Support Free | YES |