Xfinity Comcast HD Cable Box Wall Mount
Xfinity Comcast HD Cable Box Wall Mount
Published 2020-05-14T10:30:08+00:00
I have designed a wall mount for the Xfinity / Comcast HD cable box to be mount on the wall or even under a shelf. You can use the mounts in any configuration to suit your needs. I personally used the right & left brackets with the top bracket having the slotted screw hole which allows the bracket to slide for added security.
Since you can configure these in any arrangement, I'm sure they will work for other cable boxes or devices.
Dimensions are: 90mm length, 30mm width, 33mm depth, 5mm in thickness, & mounting holes are 4mm.
Printing Tip: In your slicer, as long as you have the brackets on their side with the end caps on the bottom, no supports are required. The top bracket with the slotted screw mount will require support for that slotted area.
Note to content creators (YouTube, Patreon, Educators, etc). Yes I understate that you are "technically" getting paid in the backend for creating content & thank you for creating that content. So to expand everyone's knowledge, you have permission to use this design in your content as long as you: State that it is not yours & acknowledge who designed it. Provide a link to where you got it from, so others can download & enjoy it as well.
BTW if you like my design, please don't forget the click the "like" button & show you appreciation.
Thanks & Enjoy!
I printed it on a glass build sheet using binder clips to hold onto the ceramic glass bed that the Tevo Tornado has & applied a glue stick to the glass build sheet, so that the print can adhere to. Using Sunlu PLA+ black filament the initial bed temp was 70C, nozzle temp 215, no cooling fan, & print slow on the first layer (I had it at 25). On the 2nd layer to finish drop to bed temp 60C, nozzle temp 215, cooling fan high, & increase print speed back to normal. Note: I did use a skirt to prime the nozzle, but is it your choice.
Date published | 14/05/2020 |
Support Free | YES |