Shelf Bracket, Topologie Optimized
Shelf Bracket, Topologie Optimized
Published 2020-09-11T09:35:52+00:00
An awesome really strong and stiff 3D printed shelf bracket.
This Shelf bracket is optimized to achieve maximal stiffness and strength while using minimal material. This ensures that there is minimal stress concentration in the part.
the brackets are flat on the sides to increase printability in the print direction that maximizes part strength.
Can be printed with all common FDM print materials such as PLA, PETG, ABS, ASA.
150 mm x 150 mm x 20 mm at 100% scale. Fits most build platforms and is very scalable if needed.
holes might need to be drilled out a little to fit the screws
Can be printed with all common FDM print materials such as PLA, PETG, ABS, ASA, etc.
print with medium amount of infill (ca. 25%) and increase the amount of wall, top and bottom layers for maximum strength using minimal material.
Date published | 11/09/2020 |
Material Quantity | 75 grams |
Dimensions | 150mm x 150mm x 20mm |