FULL KIT Anycubic Chiron to improve your prints with new head 5015, linear supports, feets, etc. Chiron -> RCV Mod (box for hotend, Direct Drive BMG mount, linear, E3DV6 or mk10,Marlin 2.0.7.2 ,120mm Fan for tmc, feets...

i can give help to use it.

Contact me by mail :
spelth.gualdwine@gmail.com

or Facebook:
Spelth Gualdwine

UPDATE 21/02/2021

new improve headtools, linear X mopunt V2 and firmware and prusa slicer profil

IN THE KIT
*Roll support
*Linear X and Y support MGN12 C and H
*HeadTool Direct Drive Double Fan 5015
*HeadTool Direct Drive Single Fan 5015
*HeadTool Bowden Double Fan 5015
*Filament Way on the top
*box for step down
*Special Feet for replace Chiron feets mount ( improve stability)
*MK10 Support
*E3DV6 support
*cable trunking for X axis

*Screen Protect Named RCVMOD

UPDATE 30/01/2021
ADDED IN THE FULL KIT NEW TOOLHEAD DIRECT DRIVE

https://cults3d.com/en/3d-model/various/anycubic-chiron-direct-drive-bmg-hotend-box-single-5015-and-magnetic-support-for-the-probe-rcv-mod

UPDATE 17/12/2020
1.5
*New way for Filament

UPDATE 02/12/2020
V1.4
*New Support for linear X with good holes for mount the hotend E3D V6
*PrusaSlicer and my profile is share with you. Improve all prints and it helps to change color very easy
*New Marlin 2.0.7.2 HEX ready to flash
*Filament spool holder ( 2 versions )

UPDATE 24/11/2020
V1.3
*New Box Head hotend support Direct Drive v8 5015
*New Rail Mount for X axe

*New Marlin 2.0.7.2

For question, support, contact me by mail Spelth.gualdwine@gmail.com
Or by facebook messenger Spelth Gualdwine.

FULL KIT Anycubic Chiron to improve your prints. Chiron -> RCV Mod (box for hotend, Direct Drive BMG mount, linear, E3DV6 or mk10,Marlin 2.0.7.2 ,120mm Fan for tmc, feets...
Retractation around 2mm /speed at 40mm/s
My ptfe capricorn is 65mm

For get only the Head Box Hotend BOWDEN or DIRECT DRIVE 5015 fan

https://cults3d.com/en/3d-model/various/anycubic-chiron-direct-drive-bmg-hotend-box-double-5110-and-magnetic-support-for-the-probe-rcv-mod

Or

https://cults3d.com/en/3d-model/various/anycubic-chiron-hotend-box-double-5110-and-magnetic-support-for-the-probe

All of my work for the chiron is here, the kit for upgrade the chiron to my mod : RCV mod .
Best box for hotend with double fan 5015 for cool the part and keep original fan for hotend, on the top the direct drive mount is possible ( 2 version of the box are avaible) and keep the magnetic support for the prob.
Better stability and setting for x and y with linear, a mount very easy for the 120mm for cool the tmc. i Give my firmwares Marlin 2.0.7.2 with the pack for differents mount (tmc , linear rail or not etc ). Only work with it.

If need help contact me by mail facebook : Spelth gualdwine.

Others of my designs :

https://cults3d.com/en/users/Spelth/creations

Tout mon travail pour le chiron est ici, le kit pour mettre à niveau le chiron vers mon mod: mod RCV.
Meilleur boîtier pour hotend avec double ventilateur 5015 pour refroidir la pièce et garder le ventilateur d'origine pour hotend, sur le dessus le montage direct drive est possible (2 versions de la box sont disponibles) et garder le support magnétique pour le prob.
Meilleure stabilité et réglage pour x et y avec linéaire, un montage très facile pour le 120mm pour refroidir le tmc. i Je mets mes firmware avec le pack selon la config que vous aurez faits, tmc ou pas sur l extrudeur, rails linéaires ou non etc, le fichier hex et le dossier vscode sont tous àl"interrieur du zip. Travaillez seulement avec.