Star Crashers Set
Star Crashers Set
Published 2019-09-02T15:59:56+00:00
Mobile Sentry Turret: A semi-autonomous guard that was displaced from it’s network after being damaged. It soon found itself in a strange land. It seeks to find it’s way through the new land and bring back any information, physical or intangential, to its network to prove its usefulness.
"Grey Goo" Blorb Sentry: Nano-Technology gone awry, Grey Goo is what happens when self repair and replication protocols are executed ad-infinitum, resulting in an amorphous mass of nano-technology. The Grey Goo sent off a piece of itself, "Blorb" and it took the shape of a column to look for more things to assimilate and be harder to spot.
Cyborg: While chasing down Blorb, Cyborg ended up in the Far Ring. Tales that have persisted through the millennia now consume the Cyborg’s mind. With their left hand in cannon mode, they are ready for anything.
Watcher Orb: Watcher orb is a tool utilized by the Universal Consortium. This one has been tasked to keep it’s eyes on Blorb and report any information back to HQ. Being an AI entity, it could not resist the chance to figure out the puzzle that is Blorb's need to assimilate.
Printed in Matterhackers PETG @243 degrees.
My main sugestion is to use a little brim when printing, 3 rings should be fine.
The pieces are no wider than 9.9mm and no taller than 37mm.
There are small details but non of them should prove challenging.
.16 resolution is the best for these and takes no longer than 17 minutes per model on my Ender 3. Shortest print was 14 minutes.
Date published | 02/09/2019 |
Dimensions | 9.9mmW x 37mmH |
Support Free | YES |