Skip to content

Avro Vulcan B2 RC Model (1/32 scale, 950mm span)

P1330713_Moment(4)square.jpg Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
P1390404.jpg Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
XH558Banked.jpg Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
MicroXH558.jpg Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
Underside.jpg Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
AsXL318.jpg Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
IMG_1163.JPG Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
VulcanPSS.jpg Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
IMG_1467.jpg Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
Fuse 1.stl Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
NewProbe.stl Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
Nose.stl Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
RefullingMountNew.stl Avro Vulcan B2 RC Model (1/32 scale, 950mm span)
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 3.9/5 (11 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 34.6k views
  • 80 likes
  • 319 downloads
  • 6 makes
License
3D design format
BMP, PDF, STL, and ZIP Folder details Close
  • 3D Printed Avro Vulcan B2 v3.0 Build Guide.pdf
  • DD Modified Vulcan Files.zip
  • DJDesigns 50mm EDF Avro Vulcan v3.1.zip
    • Fuselage/Alternate parts/FinTGY-1370A.stl
    • Fuselage/Alternate parts/LowerShroudLargeFingerHoles.stl
    • Fuselage/Alternate parts/LowerShroudSmallFingerHoles.stl
    • Fuselage/Alternate parts/Nose back.stl
    • Fuselage/Alternate parts/Nose front.stl
    • Fuselage/Alternate parts/Wing mount left back.stl
    • Fuselage/Alternate parts/Wing mount left front.stl
    • Fuselage/Alternate parts/Wing mount right back.stl
    • Fuselage/Alternate parts/Wing mount right front.stl
    • Fuselage/Battery Tray.stl
    • Fuselage/Depron Fin Drawing.dxf
    • Fuselage/Fin.stl
    • Fuselage/FMS mount bottom.stl
    • Fuselage/FMS mount top.stl
    • Fuselage/FMS top cover.stl
    • Fuselage/Fuse 1.stl
    • Fuselage/Fuse 2.stl
    • Fuselage/Fuse 3.stl
    • Fuselage/NewProbe.stl
    • Fuselage/Nose joiner.stl
    • Fuselage/Nose.stl
    • Fuselage/RefullingMountNew.stl
    • Fuselage/Tail.stl
    • Fuselage/Wing mount left.stl
    • Fuselage/Wing mount right.stl
    • LeftWing/Alternate parts/Wing 1L Back.stl
    • LeftWing/Alternate parts/Wing 1L Front.stl
    • LeftWing/Alternate parts/Wing 2L Back.stl
    • LeftWing/Alternate parts/Wing 2L Front.stl
    • LeftWing/Control surfaces/Control surface 1L.stl
    • LeftWing/Control surfaces/Control surface 2L.stl
    • LeftWing/Control surfaces/Control surface 3L no servo.stl
    • LeftWing/Control surfaces/Control surface 3L servo.stl
    • LeftWing/Control surfaces/Control surface 4L no servo.stl
    • LeftWing/Control surfaces/Control surface 4L servo.stl
    • LeftWing/Wing 1L.stl
    • LeftWing/Wing 2L.stl
    • LeftWing/Wing 3L no Servo.stl
    • LeftWing/Wing 3L with Servo.stl
    • LeftWing/Wing 4L.stl
    • LeftWing/WingtipL.stl
    • RightWing/Alternate parts/Wing 1R Back.stl
    • RightWing/Alternate parts/Wing 1R Front.stl
    • RightWing/Alternate parts/Wing 2R Back.stl
    • RightWing/Alternate parts/Wing 2R Front.stl
    • RightWing/Control surfaces/Control surface 1R.stl
    • RightWing/Control surfaces/Control surface 2R.stl
    • RightWing/Control surfaces/Control surface 3R no servo.stl
    • RightWing/Control surfaces/Control surface 3R servo.stl
    • RightWing/Control surfaces/Control surface 4R no servo.stl
    • RightWing/Control surfaces/Control surface 4R servo.stl
    • RightWing/Wing 1R.stl
    • RightWing/Wing 2R.stl
    • RightWing/Wing 3R no Servo.stl
    • RightWing/Wing 3R with Servo.stl
    • RightWing/Wing 4R.stl
    • RightWing/WingtipR.stl
  • DJDesigns Micro Pusher Avro Vulcan v1.1.zip
    • Control Surface L1.stl
    • Control Surface L2.stl
    • Control Surface L3.stl
    • Control Surface R1.stl
    • Control Surface R2.stl
    • Control Surface R3.stl
    • Control Surface R4.stl
    • Cowl L.stl
    • Cowl R.stl
    • Fin.stl
    • Firewall.stl
    • L1.stl
    • L2.stl
    • L3.stl
    • L4.stl
    • Micro Battery Tray.stl
    • MicroCenter.stl
    • MicroFus1.stl
    • MicroFus2.stl
    • MicroFus3.stl
    • Nose.stl
    • NoseJoiner.stl
    • R1.stl
    • R2.stl
    • R3.stl
    • R4.stl
    • Tailcone.stl
    • WingtipL.stl
    • WingtipR.stl
    • Control Surface L4.stl
  • ExtremeSports.zip
  • Fuse 1.stl
  • Gke.zip
  • KenElder.zip
  • NewProbe.stl
  • Nose.stl
  • RefullingMountNew.stl
  • Rupert80s factory and gcode.zip
  • SolentLifes Gcodes.zip
  • VB2BW.bmp

Learn more about the formats
Last update 2022-05-31 at 15:12
Publication date 2020-09-20 at 11:53
Design number 201859
DJDesigns

DJDesigns

3D printer file info

3D model description

30 June 2022. Minor update: added missing STL ControlSurfaceL4 to the micro Vulcan files.

2 December 2021. Minor update: fixed the 'off the bed' alternate right wing 2 piece. Added two alternate fuse parts: lower fan mounts WITH FINGER GRIPS! These are printed and fit, but unflown so far.

27 September 2021. Build guide now updated, no major changes to the DJDesigns versions, just addition of the refuelling probe and a battery tray support. Lots of additional parts from other designers, including a complete LW-PLA version with fixed landing gear!

16 March 2021. Now with a bonus 1/2 size pusher version for LW-PLA. Note the build guide does not cover this yet - you will be on your own, but it's pretty much as per the 50mm EDF process.

14 Jan 2021. v2.2 has additional parts donated by others, the most significant being a fin STL and Rudder option! Thanks ExtremeSports from RCGroups. There are many other tweaks awaiting your testing like G-codes for LW-PLA and an EDF cover with a bit more room for the wires. Please note though that we cannot support these additions as easily as the base STLs. Be patient!

12 Dec 2020. This is v2.1 now with Prusa gcodes and factory files kindly supplied by Rupert80.

27 Nov, We have released v2.0 which has the Fuse pieces and the wing attachment plates slightly modified to move the wings forward a little. There are a few other minor improvements too.
1. There are 'cut here' marks on most pieces that need them.
2. A better sliced alternate nose which should make it much easier to align if you don't have enough z to print as one piece.
3. The nose joiner piece is now based on DDs great idea of having a bit of the canopy included to act as a simple catch.
4. The top motor mount is now designed in two parts to allow the EDF to ESC connectors to be easily connected and disconnected.

This is a world first as far as we know!
Designed from scratch to be a scale, single EDF park-flier and it flies really well - see videos below.

Now you can print and fly one too.
UPDATED with Fin STLs and DXF (thanks to birdofplay), and an option for servo wire conduits thanks to DirtyDee (DD Modified Vulkan Files.zip in the download package). Thanks to SimonDR616 for finger grip STLs to help with hand-launching.

Flying videos here (thanks Mr Waz11):
PSS Maiden: https://www.youtube.com/watch?v=kI5QAqhPHbY
EDF Maiden: https://www.youtube.com/watch?v=8iFTizq9cGc
First flight painted: https://www.youtube.com/watch?v=5NQS0aduNcs

3D printing settings

Printing is straightforward if your printer has been set up correctly. If you have not done any thin-wall printing before, you should research that before jumping straight into printing this design.

You will need to print the nose section in LW-PLA for the EDF version, but for PSS, a regular PLA part is fine.

Almost all printed pieces should have two solid bottom layers and one perimeter. The exceptions to this are: the wing mounts, the nose joiner and the nose itself. The nose joiner and the nose are single perimeter with no solid layers and the wing mounts should be printed with two solid bottom layers then with 50% infill. A conventional 0.4 mm nozzle was used to give wall thicknesses around 0.4 mm.

A process to give two perimeters to the top 1 mm of some parts may assist with gluing; I’ve left that to your judgment.

The zip archive contains all the STLs needed, but you can choose different versions of parts to print, depending on your available build volume. Minimum build volume is 200 x 200 x 220 mm. The included PDF build guide makes everything clear.

Categories

Designs β€Ί Various β€Ί Dioramas

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.